Methods of Manufacturing Models From Polystyrene Foam.

  • Qosimova Zamira Medatovna Senior Lecturer of the Department of Mechanical Engineering and Automation, Fergana polytechnic institute, Fergana, Uzbekistan
  • Uraimov Mukhammaddiyor Bahodir ogli Fergana polytechnic institute, 3nd year student
Keywords: casting, expanded polystyrene, molds, flasks, burnt out models, thermal destruction, evacuation, ferromagnetic material

Abstract

This article discusses methods for manufacturing models from expanded polystyrene, in a foundryproduction. An analysis is made of the advantages and disadvantages of each method, taking into account the overall dimensions, types of production, and the quality of the resulting castings.

Downloads

Download data is not yet available.

References

1. Литье по выжигаемым моделям: Учебное пособие литейное производство черных и цветных металлов // Сост. В.М. Григорьев. — Хабаровск: Изд-во Хабар. гос. техн. ун-та, 2002.
2. Casting on burnt models: Textbook for foundry production of ferrous and non-ferrous metals // V.M. Grigoriev. - Khabarovsk, 2002.
3. Bahodir o‘g‘li, U. M. (2022). Calculation of Tolerances of Landings with A Gap by Software. Eurasian Scientific Herald, 8, 170-175.
4. Косимова, З. М. (2022). Анализ Измерительной Системы Через Количественное Выражение Ее Характеристик. Central Asian Journal of Theoretical and Applied Science, 3(5), 76-84.
5. Рубидинов, Ш. Ғ. У., Қосимова, З. М., Ғайратов, Ж. Ғ. У., & Акрамов, М. М. Ў. (2022). МАТЕРИАЛЫ ТРИБОТЕХНИЧЕСКОГО НАЗНАЧЕНИЯ ЭРОЗИОННЫЙ ИЗНОС. Scientific progress, 3(1), 480-486.
6. Косимова, З. М., Мамуров, Э. Т., & угли Толипов, А. Н. (2021). Повышение эффективности средств измерения при помощи расчетно-аналитического метода измерительной системы. Science and Education, 2(5), 435-440.
7. Qosimova, Z. M., & RubidinovSh, G. (2021). Influence of The Design of The Rolling Roller on The Quality of The Surface Layer During Plastic Deformation on the Workpiece. International Journal of Human Computing Studies, 3(2), 257-263.
8. Мамуров, Э. Т., Косимова, З. М., & Собиров, С. С. (2021). Разработка технологического процесса с использованием cad-cam программ. Scientific progress, 2(1), 574-578.
9. Мамуров, Э. Т., Косимова, З. М., & Джемилов, Д. И. (2021). Повышение производительности станков с числовым программным управлением в машиностроении. Science and Education, 2(5), 454-458.
10. Косимова, З. М., & Акрамов, М. М. Ў. (2021). Технологические особенности изготовления поршней. Scientific progress, 2(6), 1233-1240.
11. Мамуров, Э. Т., Косимова, З. М., & Гильванов, Р. Р. (2021). Использование программ для расчетов основного технологического времени. Scientific progress, 2(1), 918-923.
12. Medatovna, K. Z., & Igorevich, D. D. (2021). Welding Equipment Modernization. International Journal of Human Computing Studies, 3(3), 10-13.
13. Қосимова, З., Акрамов, М., Рубидинов, Ш., Омонов, А., Олимов, А., & Юнусов, М. (2021). ТОЧНОСТЬ ИЗГОТОВЛЕНИЯ ПОРШНЕЙ В ЗАВИСИМОСТИ ОТ ВЫБОРА ЗАГОТОВКИ. Oriental renaissance: Innovative, educational, natural and social sciences, 1(11), 418-426.
14. Shoxrux G'ayratjon o'g, R., Oybek o'g'li, O., & Bahodirjon o'g'li, L. A. (2022). Effect of Using Rolling Material in the Manufacture of Machine Parts. Central Asian Journal of Theoretical and Applied Science, 3(12), 137-145.
15. O‘G, R. S. G. A., Obidjonovich, T. F., Oybek O'g'li, O. A., & Bahodirjon O'g'li, L. A. (2023). ANALYSIS OF THE MILLING PROCESSING PROCESS ON THE SHAPED SURFACES OF STAMP MOLDS. European International Journal of Multidisciplinary Research and Management Studies, 3(04), 124-131.
16. Шохрух, Г. У. Р., & Гайратов, Ж. Г. У. (2022). Анализ теории разъемов, используемых в процессе подключения радиаторов автомобиля. Science and Education, 3(9), 162-167.
17. Ruzaliyev, X. S. (2022). Analysis of the Methods of Covering the Working Surfaces of the Parts with Vacuum Ion-Plasmas and the Change of Surface Layers. Eurasian Scientific Herald, 9, 27-32.
18. Teshaboyev, A. M., & Meliboyev, I. A. (2022). Types and Applications of Corrosion-Resistant Metals. Central Asian Journal of Theoretical and Applied Science, 3(5), 15-22.
19. Mamirov, A. R., Rubidinov, S. G., & Gayratov, J. G. (2022). Influence and Effectiveness of Lubricants on Friction on the Surface of Materials. Central Asian Journal of Theoretical and Applied Science, 3(4), 83-89.
20. O'g, R. S. G. A. (2022). Classification of Wear of Materials Under Conditions of High Pressures and Shock Loads.
21. Nomanjonov, S., Rustamov, M., Sh, R., & Akramov, M. (2019). STAMP DESIGN. Экономика и социум, (12 (67)), 101-104.
22. Рубидинов, Ш. Ғ. Ў. (2021). Бикрлиги паст валларга совуқ ишлов бериш усули. Scientific progress, 1(6), 413-417.
23. Рубидинов, Ш. Ғ. Ў., & Ғайратов, Ж. Ғ. Ў. (2021). Штампларни таъмирлашда замонавий технология хромлаш усулидан фойдаланиш. Scientific progress, 2(5), 469-473.
24. Рубидинов, Ш. Г. У., & Ғайратов, Ж. Г. У. (2021). Кўп операцияли фрезалаб ишлов бериш марказининг тана деталларига ишлов беришдаги унумдорлигини тахлили. Oriental renaissance: Innovative, educational, natural and social sciences, 1(9), 759-765.
25. Oybek o'g'li, O. A., & Bahodirjon o'g'li, L. A. (2023). Development of Technology for the Manufacture of Porous Permeable Materials with Anisotropic Pore Structure by Vibration Molding. CENTRAL ASIAN JOURNAL OF MATHEMATICAL THEORY AND COMPUTER SCIENCES, 4(2), 89-94.
26. Тураев, Т. Т., Топволдиев, А. A., Рубидинов, Ш. F., & Жайратов, Ж. F. (2021). Параметры и характеристики шероховатости поверхности. Oriental renaissance: Innovative, educational, natural and social sciences, 1(11), 124-132.
27. Рустамов, М. А. (2021). Методы термической обработки для повышения прочности зубчатых колес. Scientific progress, 2(6), 721-728.
28. Файзиматов, Ш. Н., & Рустамов, М. А. (2018). Аэродинамический эффект для автоматизации процесса перекачки химических агрессивных реагентов. Современные исследования, (6), 112-115.
29. Akbaraliyevich, R. M. (2022). Improving the Accuracy and Efficiency of the Production of Gears using Gas Vacuum Cementation with Gas Quenching under Pressure. Central Asian Journal of Theoretical and Applied Science, 3(5), 85-99.
30. Файзимтов, Ш. Н., & Рустамов, М. А. (2017). ПРИМЕНЕНИЕ ПРОГРЕССИВНЫХ МЕТОДОВ ДЛЯ ОРИЕНТАЦИИ И УСТАНОВКИ ЗАКЛЕПОК В ОТВЕРСТИЕ С ГОРИЗОНТАЛЬНОЙ ОСЬЮ. In НАУЧНЫЙ ПОИСК В СОВРЕМЕННОМ МИРЕ (pp. 44-45).
31. Таджибаев, Р. К., Гайназаров, А. А., & Турсунов, Ш. Т. (2021). Причины Образования Мелких (Точечных) Оптических Искажений На Ветровых Стеклах И Метод Их Устранения. Central Asian Journal of Theoretical and Applied Science, 2(11), 168-177.
32. Гайназаров, А. Т., & Абдурахмонов, С. М. (2021). Системы обработки результатов научных экспериментов. Scientific progress, 2(6), 134-141.
33. Таджибаев, Р. К., Турсунов, Ш. Т., & Гайназаров, А. А. (2022). Повышения качества трафаретных форм применением косвенного способа изготовления. Science and Education, 3(11), 532-539.
34. Таджибаев, Р. К., Турсунов, Ш. Т., Гайназаров, А. А., & Сайфиев, Б. Х. (2023). КОНТРАФАКТНАЯ ПРОДУКЦИЯ. ДЕШЕВАЯ ПРОДУКЦИЯ ИЛИ ГАРАНТИЯ БЕЗОПАСНОСТИ. CENTRAL ASIAN JOURNAL OF MATHEMATICAL THEORY AND COMPUTER SCIENCES, 4(2), 81-88.
35. Gaynazarov, A. T., & Rayimjonovich, A. R. (2021). ТЕОРЕТИЧЕСКИЕ ОСНОВЫ РАЗРАБОТКИ КЛЕЯ В ПРОЦЕССЕ СВАРКИ НА ОСНОВЕ ЭПОКСИДНОГО СПЛАВА ДЛЯ РЕМОНТА РЕЗЕРВУАРОВ РАДИАТОРА. Oriental renaissance: Innovative, educational, natural and social sciences, 1(10), 659-670.
36. Акрамов, М. М. (2022). Краткая Характеристика Горячих Цинковых Покрытий. Central Asian Journal of Theoretical and Applied Science, 3(5), 232-237.
37. Akramov, M. M. (2021). Metallarni korroziyalanishi va ularni oldini olish samarodorligi. Scientific progress, 2(2), 670-675.
38. Акрамов, М. М. (2021). ДЕТАЛЛАРНИНГ ЮЗАЛАРИНИ КИМЁВИЙ-ТЕРМИК ИШЛОВ БЕРИШГА ҚАРАТИЛГАН ТАКЛИФЛАР. Scientific progress, 2(6), 123-128.
39. Акрамов, М. М. (2021). Повышение физико-механических свойств стальных деталей при пластической деформационной обработке. Scientific progress, 2(6), 129-133.
40. Akramov, M., Rubidinov, S., & Dumanov, R. (2021). METALL YUZASINI KOROZIYABARDOSH QOPLAMALAR BILAN QOPLASHDA KIMYOVIY-TERMIK ISHLOV BERISH AHAMIYATI. Oriental renaissance: Innovative, educational, natural and social sciences, 1(10), 494-501.
41. Таджибаев, Р. К. (2022). МОДЕРНИЗАЦИЯ ТОКАРНО-ВИНТОРЕЗНОГО СТАНКА МОДЕЛИ ДИП-500 ДЛЯ ПОВЫШЕНИЯ ВОЗМОЖНОСТЕЙ (ГАБАРИТОВ) ОБРАБОТКИ ДЕТАЛЕЙ ДО ВОЗМОЖНОСТЕЙ СТАНКА МОДЕЛИ ДИП-800. Universum: технические науки, (7-1 (100)), 35-39.
Published
2023-05-01
How to Cite
Qosimova Zamira Medatovna, & Uraimov Mukhammaddiyor Bahodir ogli. (2023). Methods of Manufacturing Models From Polystyrene Foam. Central Asian Journal of Theoretical and Applied Science, 4(5), 11-15. Retrieved from https://cajotas.centralasianstudies.org/index.php/CAJOTAS/article/view/1153
Section
Articles