Influence of Low Temperature Nitrocarburizing Modes on the Structure and Properties of Х12ф1 Steel
Keywords:
wear resistance, heat resistance, tempering, carburizing, nitrocarburizing
Abstract
In the article, the influence of low-temperature nitrocarburizing on the structure and properties of Х12Ф1 steel was considered. It was found that for Х12Ф1 steel the highest values of micro-hardness are achieved at a saturation temperature of 550 °С and amount to 12,000 MPa at a four-hour saturation.
Downloads
Download data is not yet available.
References
1. Guryev, A.M. Thermocyclic and chemical-thermocyclic hardening of steels / Guryev A.M., Voroshnin L.G., Kharaev Yu.P. // Polzunovsky Bulletin, 2005. – No. 2. -P.36-43.
2. Zhelanova L. A., Shumakov A. I. Technology of vacuum nitrocarburization of tools // Progressive mechanical engineering technologies and modernity: Collection of proceedings of the international scientific and technical conference. September 9-12, 1997 Sevastopol-Donetsk. 1997. -97 p.
3. Tarasov A.N. Chemical-thermal treatment of spline and cut-off cutters made of high-speed steels // Technology and organization of production, 1978, – No. 2 – P 41.
4. Kostin N.A., Kolmykov V.I., Trusova E.V., Ermakova N.V. Method of nitrocarburizing of structural and tool steels: Patent No. 2600612 dated October 27. 2016.
5. Kolmykov, V.I. Cyanidation of tool steels in an environmentally friendly carburizer [Text] / V.I. Kolmykov, R.A. Kovynev, V.M. Pereverzev, etc. // Environmental protection in the oil and gas complex. – M.: JSC “VNIIOENG”. 2006. – No. 12. – P. 108-111.
6. Kolmykov, V.I. and others. Fatigue properties of chromium steels during nitrocarburization “Bulletin of Voronezh State University”. Voronezh: VSTU 2007. – T.3 – No. 11. – S103-105.
7. Kolmykov, V.I. Sulfocyanation of carbon steels in a urea-based bath / Kolmykov V.I., Trusova E.V. [and others] // Materials and strengthening technologies - 2010: collection. materials XVII Russian Science and Technology. conf. with international participation. – Kursk, 2010. – P.141-145.
8. Sheinerman, V.M. Rationing of carburizer consumption for cementation and carbonitration processes // MiTOM, 1973. No. 7. – P. 30-35.
9. Risbekov, S.S., Bektemirov, B.Sh. Zirconia toughened alumina (zta). Lityo i metallurgiya 2019: sbornik nauchnih rabot IV Mejdunarodnoy nauchno-prakticheskoy internet konferenciy studentov i magistrantov. Minsk: BNTU, 2019. Pp. 85-86.
10. Alimbabaeva, Z. L., Bektemirov, B. Sh., Kamilova, G. M., & Chulliyev, Z. F. Physical and technological basis for formation of coatings by electric contact sintering. Lityo i metallurgiya 2022: sbornik nauchnih rabot IV Mejdunarodnoy nauchno-prakticheskoy internet konferenciy studentov i magistrantov. Minsk: BNTU, 2022. Pp. 175-176.
11. Mukhammadjonovich, B. J. (2023). Technological Features of the Processes of Simultaneous Saturation of Steel with Nitrogen and Carbon. Nexus: Journal of Advances Studies of Engineering Science, 2(5), 42-46.
12. Mukhammadjonovich, Begatov Jakhongir, Ergashev Meirzhan Sattarugli, and Platoshina Malika Mirkamalkizi. "EFFECT OF QUENCHING AND TEMPERING TEMPERATURES ON THE STRUCTURE FORMATION OF 4XMFC, 4X5MF1C STEELS DURING LOW-TEMPERATURE NITRO-CEMENTATION." International Journal of Mechatronics and Applied Mechanics 13 (2023): 230-235.
13. Jakhongir Begatov, Sobirov Bekzodbek Ahmadjonovich, Makhmuda Yakubova, Dilnoza Kuchkarova, Malika Djalilova. the properties of high-speed steel р6м5, depending on the combined chemical heat treatment. International Journal of Mechatronics and Applied Mechanics, Issue 11, Pp: 119- 122, 2022.
2. Zhelanova L. A., Shumakov A. I. Technology of vacuum nitrocarburization of tools // Progressive mechanical engineering technologies and modernity: Collection of proceedings of the international scientific and technical conference. September 9-12, 1997 Sevastopol-Donetsk. 1997. -97 p.
3. Tarasov A.N. Chemical-thermal treatment of spline and cut-off cutters made of high-speed steels // Technology and organization of production, 1978, – No. 2 – P 41.
4. Kostin N.A., Kolmykov V.I., Trusova E.V., Ermakova N.V. Method of nitrocarburizing of structural and tool steels: Patent No. 2600612 dated October 27. 2016.
5. Kolmykov, V.I. Cyanidation of tool steels in an environmentally friendly carburizer [Text] / V.I. Kolmykov, R.A. Kovynev, V.M. Pereverzev, etc. // Environmental protection in the oil and gas complex. – M.: JSC “VNIIOENG”. 2006. – No. 12. – P. 108-111.
6. Kolmykov, V.I. and others. Fatigue properties of chromium steels during nitrocarburization “Bulletin of Voronezh State University”. Voronezh: VSTU 2007. – T.3 – No. 11. – S103-105.
7. Kolmykov, V.I. Sulfocyanation of carbon steels in a urea-based bath / Kolmykov V.I., Trusova E.V. [and others] // Materials and strengthening technologies - 2010: collection. materials XVII Russian Science and Technology. conf. with international participation. – Kursk, 2010. – P.141-145.
8. Sheinerman, V.M. Rationing of carburizer consumption for cementation and carbonitration processes // MiTOM, 1973. No. 7. – P. 30-35.
9. Risbekov, S.S., Bektemirov, B.Sh. Zirconia toughened alumina (zta). Lityo i metallurgiya 2019: sbornik nauchnih rabot IV Mejdunarodnoy nauchno-prakticheskoy internet konferenciy studentov i magistrantov. Minsk: BNTU, 2019. Pp. 85-86.
10. Alimbabaeva, Z. L., Bektemirov, B. Sh., Kamilova, G. M., & Chulliyev, Z. F. Physical and technological basis for formation of coatings by electric contact sintering. Lityo i metallurgiya 2022: sbornik nauchnih rabot IV Mejdunarodnoy nauchno-prakticheskoy internet konferenciy studentov i magistrantov. Minsk: BNTU, 2022. Pp. 175-176.
11. Mukhammadjonovich, B. J. (2023). Technological Features of the Processes of Simultaneous Saturation of Steel with Nitrogen and Carbon. Nexus: Journal of Advances Studies of Engineering Science, 2(5), 42-46.
12. Mukhammadjonovich, Begatov Jakhongir, Ergashev Meirzhan Sattarugli, and Platoshina Malika Mirkamalkizi. "EFFECT OF QUENCHING AND TEMPERING TEMPERATURES ON THE STRUCTURE FORMATION OF 4XMFC, 4X5MF1C STEELS DURING LOW-TEMPERATURE NITRO-CEMENTATION." International Journal of Mechatronics and Applied Mechanics 13 (2023): 230-235.
13. Jakhongir Begatov, Sobirov Bekzodbek Ahmadjonovich, Makhmuda Yakubova, Dilnoza Kuchkarova, Malika Djalilova. the properties of high-speed steel р6м5, depending on the combined chemical heat treatment. International Journal of Mechatronics and Applied Mechanics, Issue 11, Pp: 119- 122, 2022.
Published
2023-09-30
How to Cite
Mukhammadjonovich, B. J., & kizi, P. M. M. (2023). Influence of Low Temperature Nitrocarburizing Modes on the Structure and Properties of Х12ф1 Steel. Central Asian Journal of Theoretical and Applied Science, 4(9), 134-138. Retrieved from https://cajotas.centralasianstudies.org/index.php/CAJOTAS/article/view/1289
Section
Articles
This work is licensed under a Creative Commons Attribution 4.0 International License.
