Mechanical and Morphological Comparison of Naoh-Treated Banana Fiber Reinforced Glass Fiber
Keywords:
Banana Fiber; Glass Fiber; Epoxy Resin; Hand Lay-up Method; Tensile Test; Flexural Test; Morphological Study; S2 Glass Fibre; Flexural Testing Machine.
Abstract
In addition to having excellent mechanical qualities, banana fibre is a naturally occurring fibre material that is available in vast quantities. By producing hybrid composite materials that are in great demand, we are able to make use of those features in the field of mechanical engineering. The purpose of this study is to analyse the hybrid composite material t hat is created from banana fibre and S2 glass fibre and reinforced with epoxy resin and hardener HY951. The creation of the first sample was accomplished by the use of the hand lay-up technique, whereas the second sample was made by treating the banana fibre with a solution of sodium hydroxide. The preparation of the sample involves the distribution of a uniform compression load. Finally, the produced samples were tested for tensile and flexural strength in accordance with ASTM standards in order to evaluate the differences and similarities between the two samples. The findings indicate that the sample that was not treated with NaOH possesses a high tensile strength, whereas the solution that was treated with NaOH demonstrates a high flexural test. The scanning electron microscope (SEM) is used to analyse the morphological characteristics, which results in a strong bonding strength for the engineering application.
Downloads
Download data is not yet available.
References
Y. Shireesha, B. Venkata Suresh, M. V. A. Raju Bahubalendruni, and G. Nandipati, “Experimental investigation on mechanical properties ofBi-directional hybrid natural fibre composite (HNFC),” Mater. Today, vol. 18, pp. 165–174, 2019.
S. K. Khasim Sharif, S. B. Shikkeri, and K. Rajanikanth, “Mechanical characterisation of Jute/Banana/Epoxy reinforced laminate composite,” Mater. Today, vol. 27, pp. 835–839, 2020.
E. Sevkat, B. M. Liaw, F. Delale, and B. B. Raju, “Experimental and numerical studies of S2-glass fiber/toughened epoxy composite beams subject to drop-weight or ballistic impact,” in Volume 10: Mechanics of Solids and Structures, Parts A and B, 2007.
K. P. Marimuthu, S. M. Kumar, V. R. Kumar, and H. K. Govindaraju, “Characterisation of mechanical properties of epoxy reinforced with glass fiber and coconut fiber,” Mater. Today, vol. 16, pp. 661–667, 2019.
V. D. Tran, A. T. Le, and A. T. Hoang, “An Experimental Study on the Performance Characteristics of a Diesel Engine Fueled with ULSD-Biodiesel Blends.,” International Journal of Renewable Energy Development, vol. 10, no. 2, pp. 183–190, 2021.
Jinpu Liu, Rui Song, Saima Nasreen, and A. T. Hoang, “Analysis of the Complementary Property of Solar Energy and Thermal Power Based on Coupling Model,” Nature Environment and Pollution Technology, vol. 18, no. 5, pp. 1675–1681, 2019.
T. Hoang, “Applicability of fuel injection techniques for modern diesel engines,” in International Conference on Sustainable Manufacturing, Materials and Technologies, ICSMMT 2019, 2020, p. 020018.
O. Fabela, S. Patil, S. Chintamani, and B. H. Dennis, “Estimation of effective thermal conductivity of porous media utilizing inverse heat transfer analysis on cylindrical configuration,” in Volume 8: Heat Transfer and Thermal Engineering, 2017.
S. Patil, S. Chintamani, B. H. Dennis, and R. Kumar, “Real time prediction of internal temperature of heat generating bodies using neural network,” Therm. Sci. Eng. Prog., vol. 23, no. 100910, p. 100910, 2021.
S. Patil, S. Chintamani, J. Grisham, R. Kumar, and B. H. Dennis, “Inverse determination of temperature distribution in partially cooled heat generating cylinder,” in Volume 8B: Heat Transfer and Thermal Engineering, 2015.
M. Awais, A. Bhuva, D. Bhuva, S. Fatima, and T. Sadiq, “Optimized DEC: An effective cough detection framework using optimal weighted Features-aided deep Ensemble classifier for COVID-19,” Biomed. Signal Process. Control, p. 105026, 2023.
D. R. Bhuva and S. Kumar, “A novel continuous authentication method using biometrics for IOT devices,” Internet of Things, vol. 24, no. 100927, p. 100927, 2023.
D. Bhuva and S. Kumar, “Securing space cognitive communication with blockchain,” in 2023 IEEE Cognitive Communications for Aerospace Applications Workshop (CCAAW), 2023.
N. Kaur and S. D. Tiwari, “Role of particle size distribution and magnetic anisotropy on magnetization of antiferromagnetic nanoparticles,” J. Phys. Chem. Solids, vol. 123, pp. 279–283, 2018.
N. Kaur and S. D. Tiwari, “Thermal decomposition of ferritin core,” Appl. Phys. A Mater. Sci. Process., vol. 125, no. 11, 2019.
N. Kaur and S. D. Tiwari, “Role of wide particle size distribution on magnetization,” Appl. Phys. A Mater. Sci. Process., vol. 126, no. 5, 2020.
N. Kaur and S. D. Tiwari, “Evidence for spin-glass freezing in NiO nanoparticles by critical dynamic scaling,” J. Supercond. Nov. Magn., vol. 34, no. 5, pp. 1545–1549, 2021.
N. Kaur and S. D. Tiwari, “Estimation of magnetic anisotropy constant of magnetic nanoparticles,” in DAE Solid State Physics Symposium 2019, 2020.
H.A.A. Alsultan and K. H. Awad “Sequence Stratigraphy of the Fatha Formation in Shaqlawa Area, Northern Iraq,” Iraqi Journal of Science ,vol. 54, no.2F, p.13-21, 2021.
H.A.A. Alsultan , M.L. Hussein, , M.R.A. Al-Owaidi , A.J. Al-Khafaji and M.A. Menshed “Sequence Stratigraphy and Sedimentary Environment of the Shiranish Formation, Duhok region, Northern Iraq”, Iraqi Journal of Science, vol.63, no.11, p.4861-4871, 2022.
H.A.A. Alsultan , F.H.H. Maziqa and M.R.A. Al-Owaidi “A stratigraphic analysis of the Khasib, Tanuma and Sa’di formations in the Majnoon oil field, southern Iraq,” Bulletin of the Geological Society of Malaysia, vol. 73, p.163 – 169, 2022 .
I.I. Mohammed, and H. A. A. Alsultan “Facies Analysis and Depositional Environments of the Nahr Umr Formation in Rumaila Oil Field, Southern Iraq,” Iraqi Geological Journal, vol.55, no.2A, p.79-92, 2022.
I.I. Mohammed, and H. A. A. Alsultan “Stratigraphy Analysis of the Nahr Umr Formation in Zubair oil field, Southern Iraq,” Iraqi Journal of Science, vol. 64, no. 6, p. 2899-2912, 2023.
Praveen Barmavatu, Mihir Kumar Das, Rathod Subhash, Banoth Sravanthi, Radhamanohar Aepuru, R Venkat reddy, Yalagandala akshay kumar “Designing an Effective Plate Fin Heat Exchanger and Prediction of Thermal Performance Operated Under Different Water Blends Using Machine Learning”, Journal of Thermal Sciences and Engineering Applications, ASME Publications, Vol-15/issue-4/pp: 041001-041022, 2023.
Praveen Barmavatu, S A Deshmukh, Mihir Kumar Das, Radhamanohar Aepuru, R Venkat reddy, Banoth Sravanthi “Synthesis and experimental investigation of glass fiber epoxy/saw dust composites for flexural & tensile strength”, Materiale Plastice, vol-59/issue-02/pp:73-81/June 2022.
U.B. Vishwanatha, Y. Dharmendar Reddy, Praveen Barmavatu, B. Shankar Goud “Insights into stretching ratio and velocity slip on MHD rotating flow of Maxwell nanofluid over a stretching sheet: Semi-analytical technique OHAM”, Journal of the Indian Chemical Society, Elsevier Publishers, , Vol-100/issue-3/pp: 100937-10, 2023.
Darapu Kiran Sagar Reddy, Praveen Barmavatu, Mihir Kumar Das, Radhamanohar Aepuru “Mechanical properties evaluation and microstructural analysis study of ceramic-coated IC engine cylinder liner”, Elsevier material today proceedings, Vol-76/Part-3, pp: 518-523, 2023.
Darapu Kiran Sagar Reddy, Praveen Barmavatu, Mihir Kumar Das, Radhamanohar “Aepuru Experimental analysis of coated engine cylinder liners”, AIP Conference Proceedings, Vol 2786/ Paper ID: 030002, 2023.
Sonali Anant Deshmukh, Praveen Barmavatu, Mihir Kumar Das, Bukke Kiran Naik, Radhamanohar Aepuru “Heat Transfer Analysis in Liquid Jet Impingement for Graphene/Water Nano Fluid”, Springer Lecture Notes in Mechanical Engineering (LNME), ICETMIE-2022, pp: 1079–1090.
Barmavatu Praveen, Madan mohan reddy Nune, Yalagandala akshay kumar, Rathod Subhash, “Investigating the Effect of Minimum Quantity Lubrication on Surface Finish of EN 47 Steel Material”, Elsevier material today proceedings, , Vol-38/Part-05, pp-32-53-3257,2020.
Yalagandala akshay kumar, Shaik shafee, Barmavatu Praveen “Experimental investigation of residual stresses in a die casted alluminium fly wheel” Elsevier material today proceedings /vol19/issue-Part-02/pp: A10-A18/October2019, Impact Factor- 2.59.
Barmavatu Praveen & S. chakradhar Goud “fabrication of compact heat exchanger with composite alloys” International journal of innovative technology and exploring engineering, 8(6S4), 717–721.
Barmavatu Praveen, Yalagandala Akshay Kumar, Banoth Sravanthi, H. Ameresh “Methodological Investigation on recycling of Plastic Polymers-A Review” International journal of scientific & technological research 2277-8616/vol-9/issue-03/pp:1537-1542/march 2020.
Barmavatu Praveen & s chakradhar goud “CFD approach for different fluids varients in compact heat exchanger at different parametric conditions” International journal of scientific & technological research, /vol-8/issue-12/pp:2288-2296/december2019.
H. M. Albert et al., “Crystal formation, structural, optical, and dielectric measurements of l-histidine hydrochloride hydrate (LHHCLH) crystals for optoelectronic applications,” J. Mater. Sci.: Mater. Electron., vol. 34, no. 30, 2023.
N. Sirisha, M. Gopikrishna, P. Ramadevi, R. Bokka, K. V. B. Ganesh, and M. K. Chakravarthi, “IoT-based data quality and data preprocessing of multinational corporations,” The Journal of High Technology Management Research, vol. 34, no. 2, 2023.
M. A. Tripathi, K. Madhavi, V. S. P. Kandi, V. K. Nassa, B. Mallik, and M. K. Chakravarthi, “Machine learning models for evaluating the benefits of business intelligence systems,” The Journal of High Technology Management Research, vol. 34, no. 2, 2023.
D. S. Kumar, A. S. Rao, N. M. Kumar, N. Jeebaratnam, M. K. Chakravarthi, and S. B. Latha, “A stochastic process of software fault detection and correction for business operations,” The Journal of High Technology Management Research, vol. 34, no. 2, 2023.
B. Prasanth et al., “Maximizing Regenerative Braking Energy Harnessing in Electric Vehicles Using Machine Learning Techniques,” Electronics, vol. 12, no. 5, 2023.
R. Jain et al., “Internet of Things-based smart vehicles design of bio-inspired algorithms using artificial intelligence charging system,” Nonlinear Eng., vol. 11, no. 1, pp. 582–589, 2022.
D. Ganesh, S. M. S. Naveed, and M. K. Chakravarthi, “Design and implementation of robust controllers for an intelligent incubation Pisciculture system,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 1, no. 1, pp. 101–108, 2016.
S. Buragadda, K. S. Rani, S. V. Vasantha, and K. Chakravarthi, “HCUGAN: Hybrid cyclic UNET GAN for generating augmented synthetic images of chest X-ray images for multi classification of lung diseases,” Int. J. Eng. Trends Technol., vol. 70, no. 2, pp. 229–238, 2022.
N. Venkatesan and M. K. Chakravarthi, “Adaptive type-2 fuzzy controller for nonlinear delay dominant MIMO systems: an experimental paradigm in LabVIEW,” Int. J. Adv. Intell. Paradig., vol. 10, no. 4, p. 354, 2018.
G. S. Sudheer, C. R. Prasad, M. K. Chakravarthi, and B. Bharath, “Vehicle Number Identification and Logging System Using Optical Character Recognition,” International Journal of Control Theory and Applications, vol. 9, no. 14, pp. 267–272, 2015.
M. Chakravarthi and N. Venkatesan, “Design and implementation of adaptive model based gain scheduled controller for a real time non linear system in LabVIEW,” Research Journal of Applied Sciences, Engineering and Technology, vol. 10, no. 2, pp. 188–196, 2015.
M. Chakravarthi and N. Venkatesan, “Design and Implementation of Lab View Based Optimally Tuned PI Controller for A Real Time Non Linear Process,” Asian Journal of Scientific Research, vol. 8, no. 1, 2015.
R. Rai, V. Y. Nguyen, and J. H. Kim, “Variability analysis and evaluation for major cut flower traits of F1 hybrids in Lilium brownii var. colchesteri,” Journal of multidisciplinary sciences (Online), vol. 4, no. 2, pp. 35–41, Dec. 2022.
V. Y. Nguyen, R. Rai, J.-H. Kim, J. Kim, and J-K Na, “Ecogeographical variations of the vegetative and floral traits of Lilium amabile Palibian,” Journal of Plant Biotechnology, vol. 48, no. 4, pp. 236–245, Dec. 2021.
R. Rai and J.H. Kim, “Performance Evaluation And Variability Analysis For Major Growth And Flowering Traits Of Lilium longiflorum Thunb. Genotypes,” Journal of Experimental Biology and Agricultural Sciences, vol. 9, no. 4, pp. 439–444, Aug. 2021.
R. Rai, V. Y. Nguyen, and J. H. Kim, “Estimation Of Variability Analysis Parameters For Major Growth And Flowering Traits Of Lilium leichtlinii var. maximowiczii GERMPLASM,” Journal of Experimental Biology and Agricultural Sciences, vol. 9, no. 4, pp. 457–463, Aug. 2021.
R. Rai and J. H. Kim, “Effect Of Storage Temperature And Cultivars On Seed Germination OF Lilium×formolongi HORT.,” Journal of Experimental Biology and Agricultural Sciences, vol. 8, no. 5, pp. 621–627, Oct. 2020.
R Rai, &J.H. Kim ,Estimation of combining ability and gene action for growth and flowering traits in Lilium longiflorum.International Journal of Advanced Science and Technology,Vol.29 No.8S pp 1356-1363,2020
R. Rai, A. Badarch, and J.-H. Kim, “Identification Of Superior Three Way-Cross F1s, Its Line×Tester Hybrids And Donors For Major Quantitative Traits In Lilium×formolongi,” Journal of Experimental Biology and Agricultural Sciences, vol. 8, no. 2, pp. 157–165, Apr. 2020.
R. Rai, J. Shrestha, and J. Kim, “Line×tester analysis in lilium×formolongi: identification of superior parents for growth and flowering traits,” SAARC Journal of Agriculture, vol. 17, no. 1, pp. 175–187, Aug. 2019.
R. Rai,J.Shrestha and J.H.Kim “Combining Ability and Gene Action Analysis of Quantitative Traits in Lilium × formolongi,” vol. 30, no. 3, pp. 131–143, Dec. 2018.
T. X. Nguyen, S.-I. Lee, R. Rai, N. Kim, and Jong Hwa Kim, “Ribosomal DNA locus variation and REMAP analysis of the diploid and triploid complexes ofLilium lancifolium,” Genome, vol. 59, no. 8, pp. 551–564, Aug. 2016.
N. X. Truong, J. Y. Kim, R. Rai, J. H. Kim, N. S. Kim, and A. Wakana, “Karyotype Analysis of Korean Lilium maximowiczii Regal Populations,” Journal of The Faculty of Agriculture Kyushu University, vol. 60, no. 2, pp. 315–322, Sep. 2015.
Khilji et al., “Titanium Alloy Particles Formation in Electrical Discharge Machining and Fractal Analysis,” JOM 2021 742, vol. 74, no. 2, pp. 448–455, Jan. 2022.
A. Khilji, S. N. B. M. Safee, S. Pathak, C. R. Chilakamarry, A. S. B. A. Sani, and V. J. Reddy, “Facile Manufacture of Oxide-Free Cu Particles Coated with Oleic Acid by Electrical Discharge Machining,” Micromachines 2022, Vol. 13, Page 969, vol. 13, no. 6, p. 969, Jun. 2022.
A. Khilji, C. R. Chilakamarry, A. N. Surendran, K. Kate, and J. Satyavolu, “Natural Fiber Composite Filaments for Additive Manufacturing: A Comprehensive Review,” Sustain. 2023, Vol. 15, Page 16171, vol. 15, no. 23, p. 16171, Nov. 2023.
C. R. Chilakamarry, A. M. Mimi Sakinah, A. W. Zularism, I. A. Khilji, and S. Kumarasamy, “Glycerol Waste to Bio-Ethanol: Optimization of Fermentation Parameters by the Taguchi Method,” J. Chem., vol. 2022, p. 4892992, 2022.
C. R. Chilakamarry, A. M. M. Sakinah, A. W. Zularism, I. A. Khilji, and R. Sirohi, “Bioconversion of glycerol waste to ethanol by Escherichia coli and optimisation of process parameters,” Indian J. Exp. Biol., vol. 60, no. September, pp. 681–688, 2022.
Albo Hay Allah, M. A., & Alshamsi, H. A. (2022). Green synthesis of ZnO NPs using Pontederia crassipes leaf extract: characterization, their adsorption behavior and anti-cancer property. Biomass Conversion and Biorefinery.
Al-Nayili, A., & Albdiry, M. (2021). Identification of active structure and catalytic efficiency of MCM-22 zeolite detemplated by two different processes. Journal of Porous Materials, 28(5), 1439–1448.
Al-Nayili, A., & Haimd, S. A. (2024). Design of a new ZnCo2O4 nanoparticles/nitrogen-rich g-C3N4 sheet with improved photocatalytic activity under visible light. Journal of Cluster Science, 35(1), 341–358.
Al-nayili, A., & Rzoqy, M. (2022). Local silica sand as a silica source in the synthesis of Y zeolite. Asia-Pacific Journal of Chemical Engineering, 17(5).
Altaee, H., Alshamsi, H. A. H., & Joda, B. A. (2020). Reduced graphene oxide supported palladium nanoparticles as an efficient catalyst for aerobic oxidation of benzyl alcohol. International Conference Of Numerical Analysis And Applied Mathematics ICNAAM 2019.
Dayekh, N. S., & Al-Nayili, A. (2022). Heterogeneous photocatalytic degradation of phenol over Pd/rGO sheets. Proceeding Of The 1st International Conference On Advanced Research In Pure And Applied Science (ICARPAS2021): Third Annual Conference of Al-Muthanna University/College of Science.
Goudarzi, M., Alshamsi, H. A., Amiri, M., & Salavati-Niasari, M. (2021). ZnCo2O4/ZnO nanocomposite: Facile one-step green solid-state thermal decomposition synthesis using Dactylopius Coccus as capping agent, characterization and its 4T1 cells cytotoxicity investigation and anticancer activity. Arabian Journal of Chemistry, 14(9), 103316.
Kadhem, A. A., & Alshamsi, H. A. (2023). Biosynthesis of Ag-ZnO/rGO nanocomposites mediated Ceratophyllum demersum L. leaf extract for photocatalytic degradation of Rhodamine B under visible light. Biomass Conversion and Biorefinery.
Milad Tabatabaeinejad, S., Yousif, Q. A., Abbas Alshamsi, H., Al-Nayili, A., & Salavati-Niasari, M. (2022). Ultrasound-assisted fabrication and characterization of a novel UV-light-responsive Er2Cu2O5 semiconductor nanoparticle Photocatalyst. Arabian Journal of Chemistry, 15(6), 103826.
Neisan, R. S., Saady, N. M. C., Bazan, C., Zendehboudi, S., Al-nayili, A., Abbassi, B., & Chatterjee, P. (2023). Arsenic removal by adsorbents from water for small communities’ decentralized systems: Performance, characterization, and effective parameters. Clean Technologies, 5(1), 352–402.
Rahimzade, E., Ghanbari, M., Alshamsi, H. A., Karami, M., Baladi, M., & Salavati-Niasari, M. (2021). Simple preparation of chitosan-coated thallium lead iodide nanostructures as a new visible-light photocatalyst in decolorization of organic contamination. Journal of Molecular Liquids, 341(117299), 117299.
Teymourinia, H., Al-nayili, A., Alshamsi, H. A., Mohammadi, R., Sohouli, E., & Gholami, M. (2023). Development of CNOs/PANI-NTs/AuNPs nanocomposite as an electrochemical sensor and Z‐scheme photocatalyst for determination and degradation of ciprofloxacin. Surfaces and Interfaces, 42(103412), 103412.
Rao, D. P., Yadav, H. S., Yadava, A. K., Singh, S., & Yadav, U. (2011). In-situ preparation of macrocyclic complexes of dioxomolybdenum(VI) involving a heterocyclic precursor. Journal of Coordination Chemistry, 64(2), 293–299.
Rao, D. P., Yadav, H. S., Yadava, A. K., Singh, S., & Yadav, U. (2012). Syntheses and spectroscopic studies on macrocyclic complexes of dioxomolybdenum(vi) with furil as precursor. E-Journal of Chemistry, 9(2), 497–503.
Yadava, A. K., Yadav, H. S., Yadav, U., & Rao, D. P. (2012). Synthesis and structural characterization of novel square pyramidal oxovanadium(IV) complexes with ligands having N and O donor atoms. Turkish Journal of Chemistry.
Yadava, A. K., Yadav, H. S., Singh, S., Yadav, U., & Rao, D. P. (2013). Synthesis and characterization of some novel Schiff base complexes of Oxovanadium(IV) cation. Journal of Chemistry, 2013, 1–5.
Rao, D. P., Yadav, H. S., Yadava, A. K., Singh, S., & Yadav, U. (2012). Synthesis and characterization of cis-dioxomolybdenum(VI) complexes having furil as precursor molecule. Journal of the Serbian Chemical Society, 77(9), 1205–1210.
Singh, S., Yadav, H. S., Yadava, A. K., & Rao, D. P. (2013). Synthesis of oxovanadium(iv) complexes with tetraaza coordinating ligands. Journal of Chemistry, 1–5.
Rao, D. P. (2019). A review on versatile applications of novel Schiff bases and their metal complexes. Letters in Applied NanoBioScience, 8(4), 675–681.
Ananda Shankar Hati, and T. K. Chatterjee, “Symmetrical component filter based online condition monitoring instrumentation system for mine winder motor” Measurement (Elsevier), vol. 82, pp. 284-300, 2016.
Prashant Kumar and Ananda Shankar Hati “Review on Machine Learning Algorithm Based Fault Detection in Induction Motors,” Archives of Computational Methods in Engineering, vol: 28, pp: 1929-1940, 2021.
Kumar Prashant and Hati, Ananda Shankar “Convolutional Neural Network with batch normalization for fault detection in SCIM,” IET Electric Power Application, vol: 15, issue: 1, pp. 39-50, 2021.
Kumar Prashant and Hati, Ananda Shankar “Deep Convolutional Neural Network based on adaptive gradient optimizer for fault detection in SCIM,” ISA Transactions, vol: 111, pp: 350-359, 2021.
Prince, Hati Ananda Shankar, Chakrabarti Prasun, Abawajy Jemal Hussein and Ng Wee Keong “Development of Energy Efficient Drive for Ventilation System using Recurrent Neural Network,” Neural Computing and Applications, Vol. 33, no. 14, pp. 8659-8668, 2021.
Prince and Hati Ananda Shankar “A Comprehensive Review of Energy-Efficiency of Ventilation System using Artificial Intelligence” Renewable and Sustainable Energy Reviews (2021), vol: 146, 2021
Kumar Prashant and Hati, Ananda Shankar “Transfer Learning Based Deep CNN Model for Multiple Faults Detection in SCIM” Neural Computing and Applications (2021).
G. Mehta, S. Rubin Bose, and R. Selva Naveen, “Optimizing Lithium-ion Battery Controller Design for Electric Vehicles: A Comprehensive Study,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 2, pp. 60–70, 2023.
Nwabuokei, M. Ghouse, W. Chen, E. T. Raphael Kollannur, H. Li, and R. Bin Sulaiman, “Quantifying the Influence of Population on Carbon Emissions: A Comparative Study of Developed versus Developing Countries Using Machine Learning,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 2, pp. 71–82, 2023.
C. Victor Ikwuagwu, N. Henry Ononiwu, and K. Adeyemi, “Comprehensive Energy Analysis and Performance Evaluation of Lithium-Ion Battery Integration in Photovoltaic Systems: A Comparative Study on Reliability and Environmental Impact,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 2, pp. 83–93, 2023.
R. Raj Saxena, R. Saxena, and A. Patel, “Functional Electrical Stimulation as a Significant Bioelectronic Intervention in the Domain of Fitness: A Review,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 2, pp. 94–106, 2023.
L.N. Ramya, S. Rubin Bose, R. Selva Naveen, and R. Islam Chowdhury, “Advanced Solar Charge Controller: Integrating MPPT Technology and Online Data Logging for Efficient Energy Management,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 2, pp. 107–120, 2023.
Prince and Hati Ananda Shankar “Temperature and Humidity Dependent MRAS Based Speed Estimation Technique for Induction Motor used in Mine Ventilation Drive” Journal of Mining Science, 2021, Vol. 57, No. 5, pp. 842–851.
Kumar Prashant and Hati, Ananda Shankar “Dilated Convolutional Neural Network Based Model For Bearing Faults and Broken Rotor Bar Detection in Squirrel Cage Induction Motors” Expert Systems With Applications (2022).
Prince and Hati Ananda Shankar “Convolutional Neural Network-Long Short Term Memory Optimization for Accurate Prediction of Airflow in a Ventilation System” Expert Systems with Applications (2022).
Vatsa Aniket and Hati Ananda Shankar "Depolarization Current Prediction of Transformers OPI System Affected From Detrapped Charge Using LSTM," in IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 1-11, 2022, Art no. 2511711.
Gorai Rahul, Hati Ananda Shankar, and Maity Tanmoy, “A new cascaded multilevel converter topology with a reduced number of components” 3rd IEEE 2017 Conference on International conference on Power, Control, Signals and Instrumentation Engineering, 21-22 September 2017 | IEEE, Chennai, India., pp. 539-543.
Kumar Prashant, Hati, Ananda Shankar, Sanjeevikumar Padmanaban, Leonowicz Zbigniew and Prasun Chakrabarti “Amalgamation of Transfer Learning and Deep Convolutional Neural Network for Multiple Fault Detection in SCIM” 2020 IEEE International Conference on Environment and Electrical Engineering and 2020 IEEE Industrial and Commercial Power Systems Europe (EEEIC/I&CPS Europe), 9th-12th June 2020, Madrid, Spain.
Sinha Ashish Kumar, Kumar Prashant, Prince and Hati, Ananda Shankar, “ANN Based Fault Detection Scheme for Bearing Condition Monitoring in SRIMs using FFT, DWT and Band-pass Filters” 2020 International Conference on Power, Instrumentation, Control, and Computing (PICC) 2020 IEEE.
Prince Kumar and Hati, Ananda Shankar, “Sensor-less Speed Control of Ventilation System Using Extended Kalman Filter For High Performance,” 2021 IEEE 8th Uttar Pradesh Section International Conference on Electrical, Electronics and Computer Engineering (UPCON), 2021, pp. 1-6.
Kumar Prashant and Hati, Ananda Shankar “Support Vector Classifiers based broken rotor bar detection in Squirrel cage induction motor” Machines, Mechanisms and Robotics, Springer, Singapore, 429-438.
Hati, Ananda Shankar, and Chatterjee, T. K., “Some studies on condition monitoring techniques for online condition monitoring and fault diagnosis of mine winder motor”, International Journal of Engineering Science and Technology (IJEST), vol. 4, no. 08, pp. 3785-3793, August 2012.
Hati, Ananda Shankar, and Chatterjee, T. K., “Axial leakage flux-based online condition monitoring instrumentation system for mine winder motor” Journal of Mines, Metals & Fuels, vol. 63, no. 5&6, pp. 132-140, May-June 2015.
Hati, Ananda Shankar, and Chatterjee, T. K., “Current monitoring Instrumentation system for detecting airgap eccentricity in mine winder motor”, International Journal of Applied Engineering Research, vol. 10, no. 22, pp. 43000-43007, 2015.
Hati, Ananda Shankar, “Vibration monitoring instrumentation system for detecting airgap eccentricity in mine winder motor” Journal of Mine Metals and Fuels, vol. 64, no. 5&6, pp. 240-248, May-June 2016.
M. Qenawy, W. Zhou, and Y. Liu, “Effects of crossflow-fed-shaped holes on the adiabatic film cooling effectiveness,” International Journal of Thermal Sciences, vol. 177, p. 107578, Jul. 2022.
M. Qenawy, W. Zhou, D. Peng, and Y. Liu, “Investigation of Film Cooling Vortical Structures Behind a Cylindrical Hole Fed by an Internal Crossflow,” Sep. 2019.
M. Qenawy, M. Taha, and A. H. Abdelbaky Elbatran, “Unsteady adiabatic film cooling effectiveness behind shaped holes,” Case Studies in Thermal Engineering, vol. 34, p. 102005, Jun. 2022.
M. Qenawy, A. Hamed, W. Abdelfadeel, and S. Abdelhady, “Assessment of the Planned Expansion of Renewable Energy in Egypt,” International Journal of Applied Energy Systems, vol. 0, no. 0, pp. 0–0, Apr. 2022.
M. Qenawy, Y. Chen, J. Wang, J. Tian, and B. Chen, “Intermittent cryogen spray cooling coupled with cold air jet for heat transfer enhancement and cryogen saving of laser dermatology,” Physics of Fluids, vol. 36, no. 2, Feb. 2024.
M. Qenawy, J. Wang, J. Tian, B. Li, and B. Chen, “Investigation of unsteady flow behavior of cryogen-spray coupled with cold air jet,” Appl Therm Eng, vol. 235, Nov. 2023.
M. Qenawy, M. Taha, J. Wang, and A. H. Abdelbaky Elbatran, “Effects of hole-inlet velocity on the adiabatic film cooling effectiveness behind crossflow-fed shaped holes,” Appl Therm Eng, vol. 222, Mar. 2023.
M. Qenawy, W. Zhou, H. Chen, H. Shao, D. Peng, and Y. Liu, “Unsteady Analysis of Adiabatic Film Cooling Effectiveness Behind a Row of Circular Holes Fed by Internal Crossflow,” in Volume 5B: Heat Transfer, American Society of Mechanical Engineers, Jun. 2019.
M. Qenawy, Y. Chen, J. Wang, J. Tian, B. Li, and B. Chen, “Transient behavior of liquid film deposition and surface heat transfer upon cryogen-spray cooling coupled with cold air jet,” Int J Heat Mass Transf, vol. 223, p. 125224, May 2024.
W. Zhou, M. Qenawy, H. Shao, D. Peng, X. Wen, and Y. Liu, “Turbine vane endwall film cooling with barchan-dune shaped ramp in a single-passage transonic wind tunnel,” Int J Heat Mass Transf, vol. 162, Dec. 2020.
W. Zhou, H. Shao, M. Qenawy, D. Peng, H. Hu, and Y. Liu, “Improved Turbine Vane Endwall Film Cooling by Using Sand-Dune-Inspired Design,” Journal of Thermal Science, vol. 31, no. 3, pp. 958–973, May 2022.
J. Tian et al., “Unstable spray pattern and cooling performance of cryogen spray coupled with cold air jet: An experimental study,” Physics of Fluids, vol. 35, no. 12, Dec. 2023.
H. S. El-Mesery, M. Qenawy, Z. Hu, and W. G. Alshaer, “Evaluation of infrared drying for okra: Mathematical modelling, moisture diffusivity, energy activity and quality attributes,” Case Studies in Thermal Engineering, vol. 50, p. 103451, Oct. 2023.
M. Qenawy et al., “Performance and emission of extracted biodiesel from mixed Jatropha-Castor seeds,” Fuel, vol. 357, p. 130060, Feb. 2024.
M. Qenawy, Y. Liu, and W. Zhou, “On the unsteady behaviours of the adiabatic endwall film cooling effectiveness,” IOP Conf Ser Mater Sci Eng, vol. 1172, no. 1, p. 012031, Aug. 2021.
M. Qenawy and S. Abdelhady, “Analytical Study of a Modified Thermal Energy Storage System for PS10 in Aswan,” in The International Conference on Mathematics and Engineering Physics, May 2014, pp. 1–5.
Mohamed Qenawy, “Matlab Simulation of 10 MW Molten Salt Solar Power Tower Plant in Aswan,” Noble International Journal of Scientific Research, vol. 1, no. 1, pp. 34–43, 2017.
Mohamed Qenawy, S. Abdelhady, W. Abdelfadeel, and M. Shaban, “Analytical Study of a Modified PS10 in Aswan,” Int J Sci Eng Res, vol. 5, no. 9, pp. 976–983, 2014.
H. Chen, W. Zhou, M. Qenawy, and Y. Liu, “Experimental Study on Spatio-Temporal Variation of Double-Row Holes Film Cooling Effectiveness with Oscillating Mainstream,” Sep. 2019.
W. Zhou, M. Qenawy, Y. Liu, X. Wen, and D. Peng, “Influence of mainstream flow oscillations on spatio-temporal variation of adiabatic film cooling effectiveness,” Int J Heat Mass Transf, vol. 129, pp. 569–579, Feb. 2019.
M. Qenawy, L. Yuan, Y. Liu, D. Peng, X. Wen, and W. Zhou, “A Novel Single-Passage Transonic Wind Tunnel for Turbine-Vane Film Cooling,” J Eng Gas Turbine Power, vol. 142, no. 7, Jul. 2020.
V. K. Nomula, R. Steffi, and T. Shynu, “Examining the Far-Reaching Consequences of Advancing Trends in Electrical, Electronics, and Communications Technologies in Diverse Sectors,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 1, pp. 27–37, 2023.
M. Siddique, Z. M. Sarkinbaka, A. Z. Abdul, M. Asif, and N. Elboughdiri, “Municipal Solid Waste to Energy Strategies in Pakistan And Its Air Pollution Impacts on The Environment, Landfill Leachates: A Review,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 1, pp. 38–48, 2023.
B. Senapati, R. Regin, S. S. Rajest, P. Paramasivan, and A. J. Obaid, “Quantum Dot Solar Cells and Their Role in Revolutionizing Electrical Energy Conversion Efficiency,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 1, pp. 49–59, 2023.
M. Qenawy, H. Chen, D. Peng, Y. Liu, and W. Zhou, “Flow Structures and Unsteady Behaviors of Film Cooling from Discrete Holes Fed by Internal Crossflow,” J Turbomach, vol. 142, no. 4, Apr. 2020.
M. Qenawy, W. Zhou, and Y. Liu, “Effects of crossflow-fed-shaped holes on the adiabatic film cooling effectiveness,” International Journal of Thermal Sciences, vol. 177, p. 107578, Jul. 2022.
Bayas, E., Kumar, P., & Deshmukh, K. (1869). Review of process parameter’s effect on 3D printing. GIS Science Journal, 10(3), 834–845.
Bayas, E., Kumar, P., & Harne, M. (2023). Impact of Process Parameters on Mechanical Properties of FDM 3D-Printed Parts: A Comprehensive Review. Eur. Chem. Bull, 12(S5), 708–725.
Bayas, Eknath, Kumar, P., & Deshmukh, K. (2023). A comprehensive review: Process parameters impact on tensile strength of 3D printed PLA parts. International Journal of Advanced Research in Science, Communication and Technology, 3(2) 233–239.
E Bayas, P. (2024). Impact of Slicing Software on Geometric Correctness For FDM Additive Manufacturing. International Development Planning Review, 23(1), 704–711.
S. Dinesh, C. Elanchezhian, A. Devaraju, S. K. Sivalingam, and V. Velmurugan, “Comparative study of mechanical and morphological analysis of NaOH treated and untreated banana fiber reinforced with epoxy hybrid composite,” Mater. Today, vol. 39, pp. 861–867, 2021.
S. K. Khasim Sharif, S. B. Shikkeri, and K. Rajanikanth, “Mechanical characterisation of Jute/Banana/Epoxy reinforced laminate composite,” Mater. Today, vol. 27, pp. 835–839, 2020.
E. Sevkat, B. M. Liaw, F. Delale, and B. B. Raju, “Experimental and numerical studies of S2-glass fiber/toughened epoxy composite beams subject to drop-weight or ballistic impact,” in Volume 10: Mechanics of Solids and Structures, Parts A and B, 2007.
K. P. Marimuthu, S. M. Kumar, V. R. Kumar, and H. K. Govindaraju, “Characterisation of mechanical properties of epoxy reinforced with glass fiber and coconut fiber,” Mater. Today, vol. 16, pp. 661–667, 2019.
V. D. Tran, A. T. Le, and A. T. Hoang, “An Experimental Study on the Performance Characteristics of a Diesel Engine Fueled with ULSD-Biodiesel Blends.,” International Journal of Renewable Energy Development, vol. 10, no. 2, pp. 183–190, 2021.
Jinpu Liu, Rui Song, Saima Nasreen, and A. T. Hoang, “Analysis of the Complementary Property of Solar Energy and Thermal Power Based on Coupling Model,” Nature Environment and Pollution Technology, vol. 18, no. 5, pp. 1675–1681, 2019.
T. Hoang, “Applicability of fuel injection techniques for modern diesel engines,” in International Conference on Sustainable Manufacturing, Materials and Technologies, ICSMMT 2019, 2020, p. 020018.
O. Fabela, S. Patil, S. Chintamani, and B. H. Dennis, “Estimation of effective thermal conductivity of porous media utilizing inverse heat transfer analysis on cylindrical configuration,” in Volume 8: Heat Transfer and Thermal Engineering, 2017.
S. Patil, S. Chintamani, B. H. Dennis, and R. Kumar, “Real time prediction of internal temperature of heat generating bodies using neural network,” Therm. Sci. Eng. Prog., vol. 23, no. 100910, p. 100910, 2021.
S. Patil, S. Chintamani, J. Grisham, R. Kumar, and B. H. Dennis, “Inverse determination of temperature distribution in partially cooled heat generating cylinder,” in Volume 8B: Heat Transfer and Thermal Engineering, 2015.
M. Awais, A. Bhuva, D. Bhuva, S. Fatima, and T. Sadiq, “Optimized DEC: An effective cough detection framework using optimal weighted Features-aided deep Ensemble classifier for COVID-19,” Biomed. Signal Process. Control, p. 105026, 2023.
D. R. Bhuva and S. Kumar, “A novel continuous authentication method using biometrics for IOT devices,” Internet of Things, vol. 24, no. 100927, p. 100927, 2023.
D. Bhuva and S. Kumar, “Securing space cognitive communication with blockchain,” in 2023 IEEE Cognitive Communications for Aerospace Applications Workshop (CCAAW), 2023.
N. Kaur and S. D. Tiwari, “Role of particle size distribution and magnetic anisotropy on magnetization of antiferromagnetic nanoparticles,” J. Phys. Chem. Solids, vol. 123, pp. 279–283, 2018.
N. Kaur and S. D. Tiwari, “Thermal decomposition of ferritin core,” Appl. Phys. A Mater. Sci. Process., vol. 125, no. 11, 2019.
N. Kaur and S. D. Tiwari, “Role of wide particle size distribution on magnetization,” Appl. Phys. A Mater. Sci. Process., vol. 126, no. 5, 2020.
N. Kaur and S. D. Tiwari, “Evidence for spin-glass freezing in NiO nanoparticles by critical dynamic scaling,” J. Supercond. Nov. Magn., vol. 34, no. 5, pp. 1545–1549, 2021.
N. Kaur and S. D. Tiwari, “Estimation of magnetic anisotropy constant of magnetic nanoparticles,” in DAE Solid State Physics Symposium 2019, 2020.
H.A.A. Alsultan and K. H. Awad “Sequence Stratigraphy of the Fatha Formation in Shaqlawa Area, Northern Iraq,” Iraqi Journal of Science ,vol. 54, no.2F, p.13-21, 2021.
H.A.A. Alsultan , M.L. Hussein, , M.R.A. Al-Owaidi , A.J. Al-Khafaji and M.A. Menshed “Sequence Stratigraphy and Sedimentary Environment of the Shiranish Formation, Duhok region, Northern Iraq”, Iraqi Journal of Science, vol.63, no.11, p.4861-4871, 2022.
H.A.A. Alsultan , F.H.H. Maziqa and M.R.A. Al-Owaidi “A stratigraphic analysis of the Khasib, Tanuma and Sa’di formations in the Majnoon oil field, southern Iraq,” Bulletin of the Geological Society of Malaysia, vol. 73, p.163 – 169, 2022 .
I.I. Mohammed, and H. A. A. Alsultan “Facies Analysis and Depositional Environments of the Nahr Umr Formation in Rumaila Oil Field, Southern Iraq,” Iraqi Geological Journal, vol.55, no.2A, p.79-92, 2022.
I.I. Mohammed, and H. A. A. Alsultan “Stratigraphy Analysis of the Nahr Umr Formation in Zubair oil field, Southern Iraq,” Iraqi Journal of Science, vol. 64, no. 6, p. 2899-2912, 2023.
Praveen Barmavatu, Mihir Kumar Das, Rathod Subhash, Banoth Sravanthi, Radhamanohar Aepuru, R Venkat reddy, Yalagandala akshay kumar “Designing an Effective Plate Fin Heat Exchanger and Prediction of Thermal Performance Operated Under Different Water Blends Using Machine Learning”, Journal of Thermal Sciences and Engineering Applications, ASME Publications, Vol-15/issue-4/pp: 041001-041022, 2023.
Praveen Barmavatu, S A Deshmukh, Mihir Kumar Das, Radhamanohar Aepuru, R Venkat reddy, Banoth Sravanthi “Synthesis and experimental investigation of glass fiber epoxy/saw dust composites for flexural & tensile strength”, Materiale Plastice, vol-59/issue-02/pp:73-81/June 2022.
U.B. Vishwanatha, Y. Dharmendar Reddy, Praveen Barmavatu, B. Shankar Goud “Insights into stretching ratio and velocity slip on MHD rotating flow of Maxwell nanofluid over a stretching sheet: Semi-analytical technique OHAM”, Journal of the Indian Chemical Society, Elsevier Publishers, , Vol-100/issue-3/pp: 100937-10, 2023.
Darapu Kiran Sagar Reddy, Praveen Barmavatu, Mihir Kumar Das, Radhamanohar Aepuru “Mechanical properties evaluation and microstructural analysis study of ceramic-coated IC engine cylinder liner”, Elsevier material today proceedings, Vol-76/Part-3, pp: 518-523, 2023.
Darapu Kiran Sagar Reddy, Praveen Barmavatu, Mihir Kumar Das, Radhamanohar “Aepuru Experimental analysis of coated engine cylinder liners”, AIP Conference Proceedings, Vol 2786/ Paper ID: 030002, 2023.
Sonali Anant Deshmukh, Praveen Barmavatu, Mihir Kumar Das, Bukke Kiran Naik, Radhamanohar Aepuru “Heat Transfer Analysis in Liquid Jet Impingement for Graphene/Water Nano Fluid”, Springer Lecture Notes in Mechanical Engineering (LNME), ICETMIE-2022, pp: 1079–1090.
Barmavatu Praveen, Madan mohan reddy Nune, Yalagandala akshay kumar, Rathod Subhash, “Investigating the Effect of Minimum Quantity Lubrication on Surface Finish of EN 47 Steel Material”, Elsevier material today proceedings, , Vol-38/Part-05, pp-32-53-3257,2020.
Yalagandala akshay kumar, Shaik shafee, Barmavatu Praveen “Experimental investigation of residual stresses in a die casted alluminium fly wheel” Elsevier material today proceedings /vol19/issue-Part-02/pp: A10-A18/October2019, Impact Factor- 2.59.
Barmavatu Praveen & S. chakradhar Goud “fabrication of compact heat exchanger with composite alloys” International journal of innovative technology and exploring engineering, 8(6S4), 717–721.
Barmavatu Praveen, Yalagandala Akshay Kumar, Banoth Sravanthi, H. Ameresh “Methodological Investigation on recycling of Plastic Polymers-A Review” International journal of scientific & technological research 2277-8616/vol-9/issue-03/pp:1537-1542/march 2020.
Barmavatu Praveen & s chakradhar goud “CFD approach for different fluids varients in compact heat exchanger at different parametric conditions” International journal of scientific & technological research, /vol-8/issue-12/pp:2288-2296/december2019.
H. M. Albert et al., “Crystal formation, structural, optical, and dielectric measurements of l-histidine hydrochloride hydrate (LHHCLH) crystals for optoelectronic applications,” J. Mater. Sci.: Mater. Electron., vol. 34, no. 30, 2023.
N. Sirisha, M. Gopikrishna, P. Ramadevi, R. Bokka, K. V. B. Ganesh, and M. K. Chakravarthi, “IoT-based data quality and data preprocessing of multinational corporations,” The Journal of High Technology Management Research, vol. 34, no. 2, 2023.
M. A. Tripathi, K. Madhavi, V. S. P. Kandi, V. K. Nassa, B. Mallik, and M. K. Chakravarthi, “Machine learning models for evaluating the benefits of business intelligence systems,” The Journal of High Technology Management Research, vol. 34, no. 2, 2023.
D. S. Kumar, A. S. Rao, N. M. Kumar, N. Jeebaratnam, M. K. Chakravarthi, and S. B. Latha, “A stochastic process of software fault detection and correction for business operations,” The Journal of High Technology Management Research, vol. 34, no. 2, 2023.
B. Prasanth et al., “Maximizing Regenerative Braking Energy Harnessing in Electric Vehicles Using Machine Learning Techniques,” Electronics, vol. 12, no. 5, 2023.
R. Jain et al., “Internet of Things-based smart vehicles design of bio-inspired algorithms using artificial intelligence charging system,” Nonlinear Eng., vol. 11, no. 1, pp. 582–589, 2022.
D. Ganesh, S. M. S. Naveed, and M. K. Chakravarthi, “Design and implementation of robust controllers for an intelligent incubation Pisciculture system,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 1, no. 1, pp. 101–108, 2016.
S. Buragadda, K. S. Rani, S. V. Vasantha, and K. Chakravarthi, “HCUGAN: Hybrid cyclic UNET GAN for generating augmented synthetic images of chest X-ray images for multi classification of lung diseases,” Int. J. Eng. Trends Technol., vol. 70, no. 2, pp. 229–238, 2022.
N. Venkatesan and M. K. Chakravarthi, “Adaptive type-2 fuzzy controller for nonlinear delay dominant MIMO systems: an experimental paradigm in LabVIEW,” Int. J. Adv. Intell. Paradig., vol. 10, no. 4, p. 354, 2018.
G. S. Sudheer, C. R. Prasad, M. K. Chakravarthi, and B. Bharath, “Vehicle Number Identification and Logging System Using Optical Character Recognition,” International Journal of Control Theory and Applications, vol. 9, no. 14, pp. 267–272, 2015.
M. Chakravarthi and N. Venkatesan, “Design and implementation of adaptive model based gain scheduled controller for a real time non linear system in LabVIEW,” Research Journal of Applied Sciences, Engineering and Technology, vol. 10, no. 2, pp. 188–196, 2015.
M. Chakravarthi and N. Venkatesan, “Design and Implementation of Lab View Based Optimally Tuned PI Controller for A Real Time Non Linear Process,” Asian Journal of Scientific Research, vol. 8, no. 1, 2015.
R. Rai, V. Y. Nguyen, and J. H. Kim, “Variability analysis and evaluation for major cut flower traits of F1 hybrids in Lilium brownii var. colchesteri,” Journal of multidisciplinary sciences (Online), vol. 4, no. 2, pp. 35–41, Dec. 2022.
V. Y. Nguyen, R. Rai, J.-H. Kim, J. Kim, and J-K Na, “Ecogeographical variations of the vegetative and floral traits of Lilium amabile Palibian,” Journal of Plant Biotechnology, vol. 48, no. 4, pp. 236–245, Dec. 2021.
R. Rai and J.H. Kim, “Performance Evaluation And Variability Analysis For Major Growth And Flowering Traits Of Lilium longiflorum Thunb. Genotypes,” Journal of Experimental Biology and Agricultural Sciences, vol. 9, no. 4, pp. 439–444, Aug. 2021.
R. Rai, V. Y. Nguyen, and J. H. Kim, “Estimation Of Variability Analysis Parameters For Major Growth And Flowering Traits Of Lilium leichtlinii var. maximowiczii GERMPLASM,” Journal of Experimental Biology and Agricultural Sciences, vol. 9, no. 4, pp. 457–463, Aug. 2021.
R. Rai and J. H. Kim, “Effect Of Storage Temperature And Cultivars On Seed Germination OF Lilium×formolongi HORT.,” Journal of Experimental Biology and Agricultural Sciences, vol. 8, no. 5, pp. 621–627, Oct. 2020.
R Rai, &J.H. Kim ,Estimation of combining ability and gene action for growth and flowering traits in Lilium longiflorum.International Journal of Advanced Science and Technology,Vol.29 No.8S pp 1356-1363,2020
R. Rai, A. Badarch, and J.-H. Kim, “Identification Of Superior Three Way-Cross F1s, Its Line×Tester Hybrids And Donors For Major Quantitative Traits In Lilium×formolongi,” Journal of Experimental Biology and Agricultural Sciences, vol. 8, no. 2, pp. 157–165, Apr. 2020.
R. Rai, J. Shrestha, and J. Kim, “Line×tester analysis in lilium×formolongi: identification of superior parents for growth and flowering traits,” SAARC Journal of Agriculture, vol. 17, no. 1, pp. 175–187, Aug. 2019.
R. Rai,J.Shrestha and J.H.Kim “Combining Ability and Gene Action Analysis of Quantitative Traits in Lilium × formolongi,” vol. 30, no. 3, pp. 131–143, Dec. 2018.
T. X. Nguyen, S.-I. Lee, R. Rai, N. Kim, and Jong Hwa Kim, “Ribosomal DNA locus variation and REMAP analysis of the diploid and triploid complexes ofLilium lancifolium,” Genome, vol. 59, no. 8, pp. 551–564, Aug. 2016.
N. X. Truong, J. Y. Kim, R. Rai, J. H. Kim, N. S. Kim, and A. Wakana, “Karyotype Analysis of Korean Lilium maximowiczii Regal Populations,” Journal of The Faculty of Agriculture Kyushu University, vol. 60, no. 2, pp. 315–322, Sep. 2015.
Khilji et al., “Titanium Alloy Particles Formation in Electrical Discharge Machining and Fractal Analysis,” JOM 2021 742, vol. 74, no. 2, pp. 448–455, Jan. 2022.
A. Khilji, S. N. B. M. Safee, S. Pathak, C. R. Chilakamarry, A. S. B. A. Sani, and V. J. Reddy, “Facile Manufacture of Oxide-Free Cu Particles Coated with Oleic Acid by Electrical Discharge Machining,” Micromachines 2022, Vol. 13, Page 969, vol. 13, no. 6, p. 969, Jun. 2022.
A. Khilji, C. R. Chilakamarry, A. N. Surendran, K. Kate, and J. Satyavolu, “Natural Fiber Composite Filaments for Additive Manufacturing: A Comprehensive Review,” Sustain. 2023, Vol. 15, Page 16171, vol. 15, no. 23, p. 16171, Nov. 2023.
C. R. Chilakamarry, A. M. Mimi Sakinah, A. W. Zularism, I. A. Khilji, and S. Kumarasamy, “Glycerol Waste to Bio-Ethanol: Optimization of Fermentation Parameters by the Taguchi Method,” J. Chem., vol. 2022, p. 4892992, 2022.
C. R. Chilakamarry, A. M. M. Sakinah, A. W. Zularism, I. A. Khilji, and R. Sirohi, “Bioconversion of glycerol waste to ethanol by Escherichia coli and optimisation of process parameters,” Indian J. Exp. Biol., vol. 60, no. September, pp. 681–688, 2022.
Albo Hay Allah, M. A., & Alshamsi, H. A. (2022). Green synthesis of ZnO NPs using Pontederia crassipes leaf extract: characterization, their adsorption behavior and anti-cancer property. Biomass Conversion and Biorefinery.
Al-Nayili, A., & Albdiry, M. (2021). Identification of active structure and catalytic efficiency of MCM-22 zeolite detemplated by two different processes. Journal of Porous Materials, 28(5), 1439–1448.
Al-Nayili, A., & Haimd, S. A. (2024). Design of a new ZnCo2O4 nanoparticles/nitrogen-rich g-C3N4 sheet with improved photocatalytic activity under visible light. Journal of Cluster Science, 35(1), 341–358.
Al-nayili, A., & Rzoqy, M. (2022). Local silica sand as a silica source in the synthesis of Y zeolite. Asia-Pacific Journal of Chemical Engineering, 17(5).
Altaee, H., Alshamsi, H. A. H., & Joda, B. A. (2020). Reduced graphene oxide supported palladium nanoparticles as an efficient catalyst for aerobic oxidation of benzyl alcohol. International Conference Of Numerical Analysis And Applied Mathematics ICNAAM 2019.
Dayekh, N. S., & Al-Nayili, A. (2022). Heterogeneous photocatalytic degradation of phenol over Pd/rGO sheets. Proceeding Of The 1st International Conference On Advanced Research In Pure And Applied Science (ICARPAS2021): Third Annual Conference of Al-Muthanna University/College of Science.
Goudarzi, M., Alshamsi, H. A., Amiri, M., & Salavati-Niasari, M. (2021). ZnCo2O4/ZnO nanocomposite: Facile one-step green solid-state thermal decomposition synthesis using Dactylopius Coccus as capping agent, characterization and its 4T1 cells cytotoxicity investigation and anticancer activity. Arabian Journal of Chemistry, 14(9), 103316.
Kadhem, A. A., & Alshamsi, H. A. (2023). Biosynthesis of Ag-ZnO/rGO nanocomposites mediated Ceratophyllum demersum L. leaf extract for photocatalytic degradation of Rhodamine B under visible light. Biomass Conversion and Biorefinery.
Milad Tabatabaeinejad, S., Yousif, Q. A., Abbas Alshamsi, H., Al-Nayili, A., & Salavati-Niasari, M. (2022). Ultrasound-assisted fabrication and characterization of a novel UV-light-responsive Er2Cu2O5 semiconductor nanoparticle Photocatalyst. Arabian Journal of Chemistry, 15(6), 103826.
Neisan, R. S., Saady, N. M. C., Bazan, C., Zendehboudi, S., Al-nayili, A., Abbassi, B., & Chatterjee, P. (2023). Arsenic removal by adsorbents from water for small communities’ decentralized systems: Performance, characterization, and effective parameters. Clean Technologies, 5(1), 352–402.
Rahimzade, E., Ghanbari, M., Alshamsi, H. A., Karami, M., Baladi, M., & Salavati-Niasari, M. (2021). Simple preparation of chitosan-coated thallium lead iodide nanostructures as a new visible-light photocatalyst in decolorization of organic contamination. Journal of Molecular Liquids, 341(117299), 117299.
Teymourinia, H., Al-nayili, A., Alshamsi, H. A., Mohammadi, R., Sohouli, E., & Gholami, M. (2023). Development of CNOs/PANI-NTs/AuNPs nanocomposite as an electrochemical sensor and Z‐scheme photocatalyst for determination and degradation of ciprofloxacin. Surfaces and Interfaces, 42(103412), 103412.
Rao, D. P., Yadav, H. S., Yadava, A. K., Singh, S., & Yadav, U. (2011). In-situ preparation of macrocyclic complexes of dioxomolybdenum(VI) involving a heterocyclic precursor. Journal of Coordination Chemistry, 64(2), 293–299.
Rao, D. P., Yadav, H. S., Yadava, A. K., Singh, S., & Yadav, U. (2012). Syntheses and spectroscopic studies on macrocyclic complexes of dioxomolybdenum(vi) with furil as precursor. E-Journal of Chemistry, 9(2), 497–503.
Yadava, A. K., Yadav, H. S., Yadav, U., & Rao, D. P. (2012). Synthesis and structural characterization of novel square pyramidal oxovanadium(IV) complexes with ligands having N and O donor atoms. Turkish Journal of Chemistry.
Yadava, A. K., Yadav, H. S., Singh, S., Yadav, U., & Rao, D. P. (2013). Synthesis and characterization of some novel Schiff base complexes of Oxovanadium(IV) cation. Journal of Chemistry, 2013, 1–5.
Rao, D. P., Yadav, H. S., Yadava, A. K., Singh, S., & Yadav, U. (2012). Synthesis and characterization of cis-dioxomolybdenum(VI) complexes having furil as precursor molecule. Journal of the Serbian Chemical Society, 77(9), 1205–1210.
Singh, S., Yadav, H. S., Yadava, A. K., & Rao, D. P. (2013). Synthesis of oxovanadium(iv) complexes with tetraaza coordinating ligands. Journal of Chemistry, 1–5.
Rao, D. P. (2019). A review on versatile applications of novel Schiff bases and their metal complexes. Letters in Applied NanoBioScience, 8(4), 675–681.
Ananda Shankar Hati, and T. K. Chatterjee, “Symmetrical component filter based online condition monitoring instrumentation system for mine winder motor” Measurement (Elsevier), vol. 82, pp. 284-300, 2016.
Prashant Kumar and Ananda Shankar Hati “Review on Machine Learning Algorithm Based Fault Detection in Induction Motors,” Archives of Computational Methods in Engineering, vol: 28, pp: 1929-1940, 2021.
Kumar Prashant and Hati, Ananda Shankar “Convolutional Neural Network with batch normalization for fault detection in SCIM,” IET Electric Power Application, vol: 15, issue: 1, pp. 39-50, 2021.
Kumar Prashant and Hati, Ananda Shankar “Deep Convolutional Neural Network based on adaptive gradient optimizer for fault detection in SCIM,” ISA Transactions, vol: 111, pp: 350-359, 2021.
Prince, Hati Ananda Shankar, Chakrabarti Prasun, Abawajy Jemal Hussein and Ng Wee Keong “Development of Energy Efficient Drive for Ventilation System using Recurrent Neural Network,” Neural Computing and Applications, Vol. 33, no. 14, pp. 8659-8668, 2021.
Prince and Hati Ananda Shankar “A Comprehensive Review of Energy-Efficiency of Ventilation System using Artificial Intelligence” Renewable and Sustainable Energy Reviews (2021), vol: 146, 2021
Kumar Prashant and Hati, Ananda Shankar “Transfer Learning Based Deep CNN Model for Multiple Faults Detection in SCIM” Neural Computing and Applications (2021).
G. Mehta, S. Rubin Bose, and R. Selva Naveen, “Optimizing Lithium-ion Battery Controller Design for Electric Vehicles: A Comprehensive Study,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 2, pp. 60–70, 2023.
Nwabuokei, M. Ghouse, W. Chen, E. T. Raphael Kollannur, H. Li, and R. Bin Sulaiman, “Quantifying the Influence of Population on Carbon Emissions: A Comparative Study of Developed versus Developing Countries Using Machine Learning,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 2, pp. 71–82, 2023.
C. Victor Ikwuagwu, N. Henry Ononiwu, and K. Adeyemi, “Comprehensive Energy Analysis and Performance Evaluation of Lithium-Ion Battery Integration in Photovoltaic Systems: A Comparative Study on Reliability and Environmental Impact,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 2, pp. 83–93, 2023.
R. Raj Saxena, R. Saxena, and A. Patel, “Functional Electrical Stimulation as a Significant Bioelectronic Intervention in the Domain of Fitness: A Review,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 2, pp. 94–106, 2023.
L.N. Ramya, S. Rubin Bose, R. Selva Naveen, and R. Islam Chowdhury, “Advanced Solar Charge Controller: Integrating MPPT Technology and Online Data Logging for Efficient Energy Management,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 2, pp. 107–120, 2023.
Prince and Hati Ananda Shankar “Temperature and Humidity Dependent MRAS Based Speed Estimation Technique for Induction Motor used in Mine Ventilation Drive” Journal of Mining Science, 2021, Vol. 57, No. 5, pp. 842–851.
Kumar Prashant and Hati, Ananda Shankar “Dilated Convolutional Neural Network Based Model For Bearing Faults and Broken Rotor Bar Detection in Squirrel Cage Induction Motors” Expert Systems With Applications (2022).
Prince and Hati Ananda Shankar “Convolutional Neural Network-Long Short Term Memory Optimization for Accurate Prediction of Airflow in a Ventilation System” Expert Systems with Applications (2022).
Vatsa Aniket and Hati Ananda Shankar "Depolarization Current Prediction of Transformers OPI System Affected From Detrapped Charge Using LSTM," in IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 1-11, 2022, Art no. 2511711.
Gorai Rahul, Hati Ananda Shankar, and Maity Tanmoy, “A new cascaded multilevel converter topology with a reduced number of components” 3rd IEEE 2017 Conference on International conference on Power, Control, Signals and Instrumentation Engineering, 21-22 September 2017 | IEEE, Chennai, India., pp. 539-543.
Kumar Prashant, Hati, Ananda Shankar, Sanjeevikumar Padmanaban, Leonowicz Zbigniew and Prasun Chakrabarti “Amalgamation of Transfer Learning and Deep Convolutional Neural Network for Multiple Fault Detection in SCIM” 2020 IEEE International Conference on Environment and Electrical Engineering and 2020 IEEE Industrial and Commercial Power Systems Europe (EEEIC/I&CPS Europe), 9th-12th June 2020, Madrid, Spain.
Sinha Ashish Kumar, Kumar Prashant, Prince and Hati, Ananda Shankar, “ANN Based Fault Detection Scheme for Bearing Condition Monitoring in SRIMs using FFT, DWT and Band-pass Filters” 2020 International Conference on Power, Instrumentation, Control, and Computing (PICC) 2020 IEEE.
Prince Kumar and Hati, Ananda Shankar, “Sensor-less Speed Control of Ventilation System Using Extended Kalman Filter For High Performance,” 2021 IEEE 8th Uttar Pradesh Section International Conference on Electrical, Electronics and Computer Engineering (UPCON), 2021, pp. 1-6.
Kumar Prashant and Hati, Ananda Shankar “Support Vector Classifiers based broken rotor bar detection in Squirrel cage induction motor” Machines, Mechanisms and Robotics, Springer, Singapore, 429-438.
Hati, Ananda Shankar, and Chatterjee, T. K., “Some studies on condition monitoring techniques for online condition monitoring and fault diagnosis of mine winder motor”, International Journal of Engineering Science and Technology (IJEST), vol. 4, no. 08, pp. 3785-3793, August 2012.
Hati, Ananda Shankar, and Chatterjee, T. K., “Axial leakage flux-based online condition monitoring instrumentation system for mine winder motor” Journal of Mines, Metals & Fuels, vol. 63, no. 5&6, pp. 132-140, May-June 2015.
Hati, Ananda Shankar, and Chatterjee, T. K., “Current monitoring Instrumentation system for detecting airgap eccentricity in mine winder motor”, International Journal of Applied Engineering Research, vol. 10, no. 22, pp. 43000-43007, 2015.
Hati, Ananda Shankar, “Vibration monitoring instrumentation system for detecting airgap eccentricity in mine winder motor” Journal of Mine Metals and Fuels, vol. 64, no. 5&6, pp. 240-248, May-June 2016.
M. Qenawy, W. Zhou, and Y. Liu, “Effects of crossflow-fed-shaped holes on the adiabatic film cooling effectiveness,” International Journal of Thermal Sciences, vol. 177, p. 107578, Jul. 2022.
M. Qenawy, W. Zhou, D. Peng, and Y. Liu, “Investigation of Film Cooling Vortical Structures Behind a Cylindrical Hole Fed by an Internal Crossflow,” Sep. 2019.
M. Qenawy, M. Taha, and A. H. Abdelbaky Elbatran, “Unsteady adiabatic film cooling effectiveness behind shaped holes,” Case Studies in Thermal Engineering, vol. 34, p. 102005, Jun. 2022.
M. Qenawy, A. Hamed, W. Abdelfadeel, and S. Abdelhady, “Assessment of the Planned Expansion of Renewable Energy in Egypt,” International Journal of Applied Energy Systems, vol. 0, no. 0, pp. 0–0, Apr. 2022.
M. Qenawy, Y. Chen, J. Wang, J. Tian, and B. Chen, “Intermittent cryogen spray cooling coupled with cold air jet for heat transfer enhancement and cryogen saving of laser dermatology,” Physics of Fluids, vol. 36, no. 2, Feb. 2024.
M. Qenawy, J. Wang, J. Tian, B. Li, and B. Chen, “Investigation of unsteady flow behavior of cryogen-spray coupled with cold air jet,” Appl Therm Eng, vol. 235, Nov. 2023.
M. Qenawy, M. Taha, J. Wang, and A. H. Abdelbaky Elbatran, “Effects of hole-inlet velocity on the adiabatic film cooling effectiveness behind crossflow-fed shaped holes,” Appl Therm Eng, vol. 222, Mar. 2023.
M. Qenawy, W. Zhou, H. Chen, H. Shao, D. Peng, and Y. Liu, “Unsteady Analysis of Adiabatic Film Cooling Effectiveness Behind a Row of Circular Holes Fed by Internal Crossflow,” in Volume 5B: Heat Transfer, American Society of Mechanical Engineers, Jun. 2019.
M. Qenawy, Y. Chen, J. Wang, J. Tian, B. Li, and B. Chen, “Transient behavior of liquid film deposition and surface heat transfer upon cryogen-spray cooling coupled with cold air jet,” Int J Heat Mass Transf, vol. 223, p. 125224, May 2024.
W. Zhou, M. Qenawy, H. Shao, D. Peng, X. Wen, and Y. Liu, “Turbine vane endwall film cooling with barchan-dune shaped ramp in a single-passage transonic wind tunnel,” Int J Heat Mass Transf, vol. 162, Dec. 2020.
W. Zhou, H. Shao, M. Qenawy, D. Peng, H. Hu, and Y. Liu, “Improved Turbine Vane Endwall Film Cooling by Using Sand-Dune-Inspired Design,” Journal of Thermal Science, vol. 31, no. 3, pp. 958–973, May 2022.
J. Tian et al., “Unstable spray pattern and cooling performance of cryogen spray coupled with cold air jet: An experimental study,” Physics of Fluids, vol. 35, no. 12, Dec. 2023.
H. S. El-Mesery, M. Qenawy, Z. Hu, and W. G. Alshaer, “Evaluation of infrared drying for okra: Mathematical modelling, moisture diffusivity, energy activity and quality attributes,” Case Studies in Thermal Engineering, vol. 50, p. 103451, Oct. 2023.
M. Qenawy et al., “Performance and emission of extracted biodiesel from mixed Jatropha-Castor seeds,” Fuel, vol. 357, p. 130060, Feb. 2024.
M. Qenawy, Y. Liu, and W. Zhou, “On the unsteady behaviours of the adiabatic endwall film cooling effectiveness,” IOP Conf Ser Mater Sci Eng, vol. 1172, no. 1, p. 012031, Aug. 2021.
M. Qenawy and S. Abdelhady, “Analytical Study of a Modified Thermal Energy Storage System for PS10 in Aswan,” in The International Conference on Mathematics and Engineering Physics, May 2014, pp. 1–5.
Mohamed Qenawy, “Matlab Simulation of 10 MW Molten Salt Solar Power Tower Plant in Aswan,” Noble International Journal of Scientific Research, vol. 1, no. 1, pp. 34–43, 2017.
Mohamed Qenawy, S. Abdelhady, W. Abdelfadeel, and M. Shaban, “Analytical Study of a Modified PS10 in Aswan,” Int J Sci Eng Res, vol. 5, no. 9, pp. 976–983, 2014.
H. Chen, W. Zhou, M. Qenawy, and Y. Liu, “Experimental Study on Spatio-Temporal Variation of Double-Row Holes Film Cooling Effectiveness with Oscillating Mainstream,” Sep. 2019.
W. Zhou, M. Qenawy, Y. Liu, X. Wen, and D. Peng, “Influence of mainstream flow oscillations on spatio-temporal variation of adiabatic film cooling effectiveness,” Int J Heat Mass Transf, vol. 129, pp. 569–579, Feb. 2019.
M. Qenawy, L. Yuan, Y. Liu, D. Peng, X. Wen, and W. Zhou, “A Novel Single-Passage Transonic Wind Tunnel for Turbine-Vane Film Cooling,” J Eng Gas Turbine Power, vol. 142, no. 7, Jul. 2020.
V. K. Nomula, R. Steffi, and T. Shynu, “Examining the Far-Reaching Consequences of Advancing Trends in Electrical, Electronics, and Communications Technologies in Diverse Sectors,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 1, pp. 27–37, 2023.
M. Siddique, Z. M. Sarkinbaka, A. Z. Abdul, M. Asif, and N. Elboughdiri, “Municipal Solid Waste to Energy Strategies in Pakistan And Its Air Pollution Impacts on The Environment, Landfill Leachates: A Review,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 1, pp. 38–48, 2023.
B. Senapati, R. Regin, S. S. Rajest, P. Paramasivan, and A. J. Obaid, “Quantum Dot Solar Cells and Their Role in Revolutionizing Electrical Energy Conversion Efficiency,” FMDB Transactions on Sustainable Energy Sequence, vol. 1, no. 1, pp. 49–59, 2023.
M. Qenawy, H. Chen, D. Peng, Y. Liu, and W. Zhou, “Flow Structures and Unsteady Behaviors of Film Cooling from Discrete Holes Fed by Internal Crossflow,” J Turbomach, vol. 142, no. 4, Apr. 2020.
M. Qenawy, W. Zhou, and Y. Liu, “Effects of crossflow-fed-shaped holes on the adiabatic film cooling effectiveness,” International Journal of Thermal Sciences, vol. 177, p. 107578, Jul. 2022.
Bayas, E., Kumar, P., & Deshmukh, K. (1869). Review of process parameter’s effect on 3D printing. GIS Science Journal, 10(3), 834–845.
Bayas, E., Kumar, P., & Harne, M. (2023). Impact of Process Parameters on Mechanical Properties of FDM 3D-Printed Parts: A Comprehensive Review. Eur. Chem. Bull, 12(S5), 708–725.
Bayas, Eknath, Kumar, P., & Deshmukh, K. (2023). A comprehensive review: Process parameters impact on tensile strength of 3D printed PLA parts. International Journal of Advanced Research in Science, Communication and Technology, 3(2) 233–239.
E Bayas, P. (2024). Impact of Slicing Software on Geometric Correctness For FDM Additive Manufacturing. International Development Planning Review, 23(1), 704–711.
S. Dinesh, C. Elanchezhian, A. Devaraju, S. K. Sivalingam, and V. Velmurugan, “Comparative study of mechanical and morphological analysis of NaOH treated and untreated banana fiber reinforced with epoxy hybrid composite,” Mater. Today, vol. 39, pp. 861–867, 2021.
Published
2024-04-29
How to Cite
Manikandan S., Gandhi M., & B. Vaidianathan. (2024). Mechanical and Morphological Comparison of Naoh-Treated Banana Fiber Reinforced Glass Fiber . Central Asian Journal of Theoretical and Applied Science, 5(2), 64-75. Retrieved from https://cajotas.centralasianstudies.org/index.php/CAJOTAS/article/view/1448
Section
Articles
