Artificial Neural Network-Based Energy Management System for Optimized Solar Photovoltaic Performance
Abstract
The purpose of this research is to offer an improved maximum power point tracking (MPPT) method that makes use of artificial neural networks (ANN) in order to maximise the effectiveness of photovoltaic (PV) systems. Through the process of estimating and adjusting the duty cycle of the DC-DC converter in order to track the maximum power point, the suggested ANN controller is able to regulate itself in response to climatic circumstances (irradiance and temperature). For the purpose of training the Maximum Power Point Tracking (MPPT) algorithm, measurements from a perturb and observe (P&O) algorithm are recorded under a range of different climatic circumstances. The usefulness of the suggested technique is demonstrated by simulation and experimental findings, which show that the new method is more efficient, has fewer oscillations, and has less overshoot than traditional P&O MPPT methods. The performance of the proposed method has been confirmed by experimental verification using the DC-DC Converter and the supporting platform under steady-state conditions.
Downloads
References
A. G. Usman et al., "Environmental modelling of CO concentration using AI-based approach supported with filters feature extraction: A direct and inverse chemometrics-based simulation," Sustain. Chem. Environ., vol. 2, p. 100011, 2023, doi: 10.1016/j.scenv.2023.100011.
A. Gbadamosi et al., "New-generation machine learning models as prediction tools for modeling interfacial tension of hydrogen-brine system," Int. J. Hydrogen Energy, vol. 50, pp. 1326–1337, 2024, doi: 10.1016/j.ijhydene.2023.09.170.
Z. H. Ahmed, A. S. Hameed, M. L. Mutar, and H. Haron, "An Enhanced Ant Colony System Algorithm Based on Subpaths for Solving the Capacitated Vehicle Routing Problem," Symmetry, vol. 15, no. 11, 2020.
M. F. Alrifaie, Z. H. Ahmed, A. S. Hameed, and M. L. Mutar, "Using machine learning technologies to classify and predict heart disease," Int. J. Adv. Comput. Sci. Appl., vol. 12, no. 3, 2021.
M. F. Alrifaie, O. A. Ismael, A. S. Hameed, and M. B. Mahmood, "Pedestrian and objects detection by using learning complexity-aware cascades," in Proc. 2021 2nd Inf. Technol. Enhance e-learning Other Appl. (IT-ELA), 2021, pp. 12–17.
C. Elayaraja, J. Rahila, P. Velavan, S. S. Rajest, T. Shynu, and M. M. Rahman, "Depth sensing in AI on exploring the nuances of decision maps for explainability," in Advances in Computational Intelligence and Robotics, IGI Global, USA, 2024, pp. 217–238.
A. S. Hameed, B. M. Aboobaider, N. H. Choon, M. L. Mutar, and W. H. Bilal, "Review on the methods to solve combinatorial optimization problems particularly: quadratic assignment model," Int. J. Eng. Technol., vol. 7, no. 3.20, pp. 15–20, 2018.
A. S. Hameed, B. M. Aboobaider, N. H. Choon, M. L. Mutar, and W. H. Bilal, "A comparative study between the branch and cut algorithm and ant colony algorithm to solve the electric meter reader problem in rural areas," Opcion, vol. 34, no. 86, pp. 1525–1539, 2018.
A. S. Hameed, B. M. Aboobaider, H. C. Ngo, and M. L. Mutar, "Improved discrete differential evolution algorithm in solving quadratic assignment problem for best solutions," Int. J. Adv. Comput. Sci. Appl., vol. 9, no. 12, 2018.
N. Femia, G. Petrone, G. Spagnuolo, and M. Vitelli, "Optimization of perturb and observe maximum power point tracking method," IEEE Trans. Power Electron., vol. 20, no. 4, pp. 963–973, 2005.
W. Zhu, L. Shang, P. Li, and H. Guo, "Modified hill climbing MPPT algorithm with reduced steady-state oscillation and improved tracking efficiency," J. Eng., vol. 2018, no. 17, pp. 1878–1883, 2018.
C.-H. Lin, C.-H. Huang, Y.-C. Du, and J.-L. Chen, "Maximum photovoltaic power tracking for the PV array using the fractional-order incremental conductance method," Appl. Energy, vol. 88, no. 12, pp. 4840–4847, 2011.
A. Al-Amoudi, "Optimal control of a grid-connected PV system for maximum power point tracking and unity power factor," in Proc. 7th Int. Conf. Power Electron. Variable Speed Drives, London, UK, 1998.
K. Sundareswaran, V. Vigneshkumar, and S. Palani, "Development of a hybrid genetic algorithm/perturb and observe algorithm for maximum power point tracking in photovoltaic systems under non‐uniform insolation," IET Renew. Power Gener., vol. 9, no. 7, pp. 757–765, 2015.
H. S. Agha, Z.-U. Koreshi, and M. B. Khan, "Artificial neural network based maximum power point tracking for solar photovoltaics," in Proc. 2017 Int. Conf. Inf. Commun. Technol. (ICICT), Karachi, Pakistan, 2017.
A. E. Khateb, N. A. Rahim, J. Selvaraj, and M. N. Uddin, "Fuzzy-logic-controller-based SEPIC converter for maximum power point tracking," IEEE Trans. Ind. Appl., vol. 50, no. 4, pp. 2349–2358, 2014.
K. S. Tey, S. Mekhilef, M. Seyedmahmoudian, B. Horan, A. T. Oo, and A. Stojcevski, "Improved differential evolution-based MPPT algorithm using SEPIC for PV systems under partial shading conditions and load variation," IEEE Trans. Ind. Informat., vol. 14, no. 10, pp. 4322–4333, 2018.
R. B. A. Koad, A. F. Zobaa, and A. El-Shahat, "A novel MPPT algorithm based on particle swarm optimization for photovoltaic systems," IEEE Trans. Sustainable Energy, vol. 8, no. 2, pp. 468–476, 2017.
M. Kefayat, A. Lashkar Ara, and S. A. Nabavi Niaki, "A hybrid of ant colony optimization and artificial bee colony algorithm for probabilistic optimal placement and sizing of distributed energy resources," Energy Convers. Manag., vol. 92, no. 3, pp. 149–161, 2015.
A. S. Hameed, M. L. Mutar, H. M. B. Alrikabi, Z. H. Ahmed, A. A. Abdul-Razaq, and H. K. Nasser, "A hybrid method integrating a discrete differential evolution algorithm with tabu search algorithm for the quadratic assignment problem: A new approach for locating hospital departments," Math. Probl. Eng., vol. 2021, p. 6653056, 2021.
J. Kumar, M. Radhakrishnan, S. Palaniappan, K. M. Krishna, K. Biswas, S. G. Srinivasan, and N. B. Dahotre, "Cr content dependent lattice distortion and solid solution strengthening in additively manufactured CoFeNiCrx complex concentrated alloys—A first principles approach," Mater. Today Commun., vol. 109485, 2024.
A. T. Jalil et al., "Analytical model for thermoelastic damping in in-plane vibrations of circular cross-sectional micro/nanorings with dual-phase-lag heat conduction," J. Vibr. Eng. Technol., vol. 12, no. 1, pp. 797–810, 2024.
K. Shrestha et al., "Farming systems research in Nepal: Concepts, design, and methodology for enhancing agricultural productivity and sustainability," J. Multidiscip. Sci., vol. 6, no. 1, pp. 17–25, May 2024, doi: 10.33888/jms.2024.613.
K. S. Goud, K. U. Reddy, P. B. Kumar, and S. G. A. Hasan, "Magnetic Iron Oxide Nanoparticles: Various Preparation Methods and Properties," IJSRSET, vol. 3, no. 2, pp. 535–538, 2017.
A. A. Khudhair et al., "Impact on Higher Education and College Students in Dijlah University after COVID through E-learning," Comput.-Aided Des. Appl., pp. 104–115, 2023.
M. A. Yassin et al., "Advancing SDGs: Predicting Future Shifts in Saudi Arabia’s Terrestrial Water Storage Using Multi-Step-Ahead Machine Learning Based on GRACE Data," 2024.
M. A. Yassin, A. G. Usman, S. I. Abba, D. U. Ozsahin, and I. H. Aljundi, "Intelligent learning algorithms integrated with feature engineering for sustainable groundwater salinization modelling: Eastern Province of Saudi Arabia," Results Eng., vol. 20, p. 101434, 2023, doi: 10.1016/j.rineng.2023.101434.
M. Radhakrishnan et al., "Evolution of microstructures in laser additive manufactured HT-9 ferritic martensitic steel," Mater. Charact., vol. 218, p. 114551, 2024.
M. Radhakrishnan et al., "Influence of thermal conductivity on evolution of grain morphology during laser-based directed energy deposition of CoCrxFeNi high entropy alloys," Additive Manuf., vol. 92, p. 104387, 2024.
M. S. Reddy et al., "Extraction of Water from Ambient Air by Using Thermoelectric Modules," IJSRSET, vol. 3, no. 2, pp. 733–737, 2017.
M. L. Mutar et al., "Rev Vehicle Routing Problem and Future Research Trend," Int. J. Appl. Eng. Res., vol. 7, no. 3, 2017.
M. L. Mutar et al., "Multi-objectives ant colony system for solving multi-objectives capacitated vehicle routing problem," J. Theor. Appl. Inf. Technol., vol. 98, no. 24, 2020.
P. S. Venkateswaran et al., "A study on the impact of intelligent systems on Human Resource Management," in Advances in Computational Intelligence and Robotics, IGI Global, USA, 2024, pp. 153–174.
P. C. Kumar et al., "Find the Performance of Dual Fuel Engine Followed by Waste Cooking Oil Blends with Acetylene," Int. J. Innov. Technol. Explor. Eng., vol. 9, no. 2, pp. 127–131, 2019.
R. Rai and J. H. Kim, "Performance evaluation and variability analysis for major growth and flowering traits of Lilium longiflorum Thunb. genotypes," J. Exp. Biol. Agric. Sci., vol. 9, no. 4, pp. 439–444, Aug. 2021, doi: 10.18006/2021.9(4).439.444.
R. Rai et al., "Conversion of farming systems into organic biointensive farming systems and the transition to sustainability in agro-ecology: Pathways towards sustainable agriculture and food systems," J. Multidiscip. Sci., vol. 6, no. 1, pp. 26–31, Jun. 2024, doi: 10.33888/jms.2024.624.
R. Rai, V. Y. Nguyen, and J. H. Kim, "Estimation of variability analysis parameters for major growth and flowering traits of Lilium leichtlinii var. maximowiczii germplasm," J. Exp. Biol. Agric. Sci., vol. 9, no. 4, pp. 457–463, Aug. 2021, doi: 10.18006/2021.9(4).457.463.
R. Rai, V. Y. Nguyen, and J. H. Kim, "Variability analysis and evaluation for major cut flower traits of F1 hybrids in Lilium brownii var. colchesteri," J. Multidiscip. Sci., vol. 4, no. 2, pp. 35–41, Dec. 2022, doi: 10.33888/jms.2022.425.
S. Chaudhary, A. K. Shrestha, S. Rai, D. K. Acharya, S. Subedi, and R. Rai, "Agroecology integrates science, practice, movement, and future food systems," J. Multidiscip. Sci., vol. 5, no. 2, pp. 39–60, Dec. 2023.
S. I. Abba, A. G. Usman, and S. IŞIK, "Simulation for response surface in the HPLC optimization method development using artificial intelligence models: A data-driven approach," Chemom. Intell. Lab. Syst., vol. 201, no. April, 2020, doi: 10.1016/j.chemolab.2020.104007.
S. Padmaja, S. Mishra, A. Mishra, J. J. V. Tembra, P. Paramasivan, and S. S. Rajest, "Insights into AI systems for recognizing human emotions, actions, and gestures," in Advances in Computational Intelligence and Robotics, IGI Global, USA, 2024, pp. 389–410.
S. Palaniappan, K. M. Krishna, M. Radhakrishnan, S. Sharma, M. S. Ramalingam, R. Banerjee, and N. B. Dahotre, "Thermokinetics driven microstructure and phase evolution in laser-based additive manufacturing of Ti-25wt.% Nb and its performance in physiological solution," Materialia, vol. 37, p. 102190, 2024.
S. Palaniappan, S. S. Joshi, S. Sharma, M. Radhakrishnan, K. M. Krishna, and N. B. Dahotre, "Additive manufacturing of FeCrAl alloys for nuclear applications—A focused review," Nuclear Materials and Energy, vol. 101702, 2024.
S. Rai and R. Rai, "Advancement of kiwifruit cultivation in Nepal: Top working techniques," J. Multidiscip. Sci., vol. 6, no. 1, pp. 11–16, Feb. 2024.
S. Rai and R. Rai, "Advancements and practices in budding techniques for kiwifruit propagation," J. Multidiscip. Sci., vol. 6, no. 1, pp. 26–31, Jun. 2024, doi: 10.33888/jms.2024.622.
S. Rai and R. Rai, "Monkey menace in Nepal: An analysis and proposed solutions," J. Multidiscip. Sci., vol. 6, no. 1, pp. 26–31, Jun. 2024, doi: 10.33888/jms.2024.614.
S. S. Rajest, S. Moccia, B. Singh, R. Regin, and J. Jeganathan, Eds., "Optimizing intelligent systems for cross-industry application," Advances in Computational Intelligence and Robotics, IGI Global, USA, 30-Aug-2024.
S. Singhal, A. Kotagiri, L. S. Samayamantri, and S. S. Rajest, "Interpretable machine learning models for human action and emotion deciphering," in Advances in Computer and Electrical Engineering, IGI Global, USA, 2024, pp. 449–468.
S. G. A. Hasan, S. M. Amoodi, and G. S. Kumar, "Under floor air distribution for better indoor air quality," Int. J. Eng. Manag. Res., vol. 5, no. 3, pp. 744–755, 2015.
S. G. A. Hasan, S. S. Fatima, and G. S. Kumar, "Design of a VRF air conditioning system with energy conservation on commercial building," Int. J. Eng. Sci. & Res. Technol., vol. 4, no. 7, pp. 535–549, 2015.
S. M. Amoodi, G. S. Kumar, and S. G. A. Hasan, "Design of II stage evaporative cooling system for residential," Int. J. Eng. Manag. Res., vol. 5, no. 3, pp. 810–815, 2015.
F. A. O. Sari, A. A. H. Alrammahi, A. S. Hameed, H. M. B. Alrikabi, A. A. Abdul–Razaq, H. K. Nasser, and M. F. AL-Rifaie, "Networks cyber security model by using machine learning techniques," Int. J. Intell. Syst. Appl. Eng., vol. 10, no. 1, pp. 257–263, 2022.
T. Wahidi, S. A. P. Quadri, S. G. A. Hasan, M. G. Sundkey, and P. R. Kumar, "Experimental investigation on performance, emission and combustion analysis of CNG-Diesel enrichment with varying injection operating pressures," IOSR J. Mech. Civil Eng., vol. 12, no. 2, pp. 23–29, 2015.
U. Srilakshmi, I. Sandhya, J. Manikandan, A. H. Bindu, R. Regin, and S. S. Rajest, "Design and implementation of energy-efficient protocols for underwater wireless sensor networks," in Advances in Computer and Electrical Engineering, IGI Global, USA, 2024, pp. 417–430.
V. Chunduri, S. A. Hannan, G. M. Devi, V. K. Nomula, V. Tripathi, and S. S. Rajest, "Deep convolutional neural networks for lung segmentation for diffuse interstitial lung disease on HRCT and volumetric CT," in Advances in Computational Intelligence and Robotics, IGI Global, USA, 2024, pp. 335–350.
V. Y. Nguyen, R. Rai, J.-H. Kim, J. Kim, and J.-K. Na, "Ecogeographical variations of the vegetative and floral traits of Lilium amabile Palibian," J. Plant Biotechnol., vol. 48, no. 4, pp. 236–245, Dec. 2021, doi: 10.5010/jpb.2021.48.4.236.
Copyright (c) 2025 Central Asian Journal of Theoretical and Applied Science

This work is licensed under a Creative Commons Attribution 4.0 International License.