Improving the Accuracy and Efficiency of the Production of Gears using Gas Vacuum Cementation with Gas Quenching under Pressure

  • Rustamov Mukhammadazim Akbaraliyevich Senior Lecturer of the Department of Mechanical Engineering and Automation, Fergana polytechnic institute, Fergana, Uzbekistan
Keywords: Contact endurance of teeth, efficiency improvement, cementation, gas vacuum cementation, quenching with gas under high pressure, nitriding

Abstract

The article discusses effective methods of increasing the strength properties of steel gears of cylindrical and conical gears, mainly using methods of chemical-thermal treatment, gas cementation (nitrocementation) in controlled endothermic atmospheres with subsequent quenching in oil.

Downloads

Download data is not yet available.

References

1. Рустамов, М. А. (2021). Методы термической обработки для повышения прочности зубчатых колес. Scientific progress, 2(6), 721-728.
2. Nomanjonov, S., Rustamov, M., Rubidinov, S., & Akramov, M. (2019). STAMP DESIGN. Экономика и социум, (12), 101-104.
3. Рубидинов, Ш. Ғ. Ў. (2021). Бикрлиги паст валларга совуқ ишлов бериш усули. Scientific progress, 1(6), 413-417.
4. Тешабоев, А. Э., Рубидинов, Ш. Ғ. Ў., Назаров, А. Ғ. Ў., & Ғайратов, Ж. Ғ. Ў. (2021). Машинасозликда юза тозалигини назоратини автоматлаш. Scientific progress, 1(5).
5. Qosimova, Z. M., & RubidinovSh, G. (2021). Influence of The Design of The Rolling Roller on The Quality of The Surface Layer During Plastic Deformation on the Workpiece. International Journal of Human Computing Studies, 3(2), 257-263.
6. Рубидинов, Ш. Ғ. Ў., & Ғайратов, Ж. Ғ. Ў. (2021). Штампларни таъмирлашда замонавий технология хромлаш усулидан фойдаланиш. Scientific progress, 2(5), 469-473.
7. Рубидинов, Ш. Г. У., & Ғайратов, Ж. Г. У. (2021). Кўп операцияли фрезалаб ишлов бериш марказининг тана деталларига ишлов беришдаги унумдорлигини тахлили. Oriental renaissance: Innovative, educational, natural and social sciences, 1(9), 759-765.
8. Рубидинов, Ш. Ғ. Ў., & Акбаров, К. И. Ў. (2021). Машинасозликда сочилувчан материалларни ташишда транспортер тизимларининг аҳамияти. Scientific progress, 2(2), 182-187.
9. Рубидинов, Ш. F. У. (2021). Акбаров КИУ МАШИНАСОЗЛИКДА СОЧИЛУВЧАН МАТЕРИАЛЛАРНИ ТАШИШДА ТРАНСПОРТЕР ТИЗИМЛАРИНИНГ АХДМИЯТИ. Scientific progress, 2(2), 182-187.
10. Рубидинов, Ш. Ғ. У., Ғайратов, Ж. Ғ. У., & Райимжонов, Қ. Р. Ў. (2021). ИЗНОСОСТОЙКИЕ МЕТАЛЛОПОДОБНЫЕ СОЕДИНЕНИЯ. Scientific progress, 2(8), 441-448.
11. Akramov, M., Rubidinov, S., & Dumanov, R. (2021). METALL YUZASINI KOROZIYABARDOSH QOPLAMALAR BILAN QOPLASHDA KIMYOVIY-TERMIK ISHLOV BERISH AHAMIYATI. Oriental renaissance: Innovative, educational, natural and social sciences, 1(10), 494-501.
12. Қосимова, З., Акрамов, М., Рубидинов, Ш., Омонов, А., Олимов, А., & Юнусов, М. (2021). ТОЧНОСТЬ ИЗГОТОВЛЕНИЯ ПОРШНЕЙ В ЗАВИСИМОСТИ ОТ ВЫБОРА ЗАГОТОВКИ. Oriental renaissance: Innovative, educational, natural and social sciences, 1(11), 418-426.
13. Рубидинов, Ш. Ғ. У., Қосимова, З. М., Ғайратов, Ж. Ғ. У., & Акрамов, М. М. Ў. (2022). МАТЕРИАЛЫ ТРИБОТЕХНИЧЕСКОГО НАЗНАЧЕНИЯ ЭРОЗИОННЫЙ ИЗНОС. Scientific progress, 3(1), 480-486.
14. Рубидинов, Ш. Ғ. У., & Раимжонов, Қ. Р. Ў. (2022). ИЗМЕНЕНИЕ МИКРОРЕЛЬЕФА ПОВЕРХНОСТИ И ШЕРОХОВАТОСТИ ДОПУСКОВ ДЕТАЛЕЙ ПОСЛЕ ХИМИЧКЕ-ТЕРМИЧЕСКИЙ ОБРАБОТКИ БОРИРОВАНИЯ. Scientific progress, 3(1), 34-40.
15. Тешабоев, А. М., & Рубидинов, Ш. Ғ. У. (2022). ВАКУУМНОЕ ИОННО-ПЛАЗМЕННОЕ ПОКРЫТИЕ ДЕТАЛЕЙ И АНАЛИЗ ИЗМЕНЕНИЯ ПОВЕРХНОСТНЫХ СЛОЕВ. Scientific progress, 3(2), 286-292.
16. Тешабоев, А. М., Рубидинов, Ш. Ғ. У., & Ғайратов, Ж. Ғ. У. (2022). АНАЛИЗ РЕМОНТА ПОВЕРХНОСТЕЙ ДЕТАЛЕЙ С ГАЗОТЕРМИЧЕСКИМ И ГАЛЬВАНИЧЕСКИМ ПОКРЫТИЕМ. Scientific progress, 3(2), 861-867.
17. Рубидинов, Ш. Ғ. У., Ғайратов, Ж. Ғ. У., & Ахмедов, У. А. У. (2022). МАТЕРИАЛЫ, СПОСОБНЫЕ УМЕНЬШИТЬ КОЭФФИЦИЕНТ ТРЕНИЯ ДРУГИХ МАТЕРИАЛОВ. Scientific progress, 3(2), 1043-1048.
18. Mamirov, A. R., Rubidinov, S. G., & Gayratov, J. G. (2022). Influence and Effectiveness of Lubricants on Friction on the Surface of Materials. CENTRAL ASIAN JOURNAL OF THEORETICAL & APPLIED SCIENCES, 3(4), 83-89.
19. Mamadjanov, A. M., & Sadirov, S. (2021). Analysis of design errors in mechanical engineering. Scientific progress, 2(1), 1648-1654.
20. Mamadjanov, A. M., Yusupov, S. M., & Sadirov, S. (2021). Advantages and the future of cnc machines. Scientific progress, 2(1), 1638-1647.
21. Medatovna, K. Z., & Igorevich, D. D. (2021). Welding Equipment Modernization. International Journal of Human Computing Studies, 3(3), 10-13.
22. Косимова, З. М., & Акрамов, М. М. Ў. (2021). Технологические особенности изготовления поршней. Scientific progress, 2(6), 1233-1240.
23. Yulchieva, S. B., Olimov, A., & yusuf Yunusov, M. (2022). Gas Thermal and Galvanic Coatings on the Surface of Parts. International Journal of Innovative Analyses and Emerging Technology, 2(2), 26-30.
24. Рубидинов, Ш. Ғ. Ў., Муродов, Р. Т. Ў., & Хакимжонов, Х. Т. Ў. (2022). ХАРАКТЕРИСТИКИ ИЗНОСОСТОЙКИХ ПОКРЫТИЙ И МОДИФИЦИРОВАННЫХ ПОКРЫТИЙ. Scientific progress, 3(3), 371-376.
25. Mamatov, S. A. (2022). Paint Compositions for the Upper Layers of Paint Coatings. Middle European Scientific Bulletin, 23, 137-142.
26. Таджибаев, Р. К., Гайназаров, А. А., & Турсунов, Ш. Т. (2021). Причины Образования Мелких (Точечных) Оптических Искажений На Ветровых Стеклах И Метод Их Устранения. CENTRAL ASIAN JOURNAL OF THEORETICAL & APPLIED SCIENCES, 2(11), 168-177.
27. Tadjibaev, R. K., & Tursunov, S. T. (2022). Scientific Research and Study Behavior of Curved Pipes Under Loads. CENTRAL ASIAN JOURNAL OF THEORETICAL & APPLIED SCIENCES, 3(3), 81-86.
Published
2022-05-16
How to Cite
Akbaraliyevich, R. M. (2022). Improving the Accuracy and Efficiency of the Production of Gears using Gas Vacuum Cementation with Gas Quenching under Pressure. Central Asian Journal of Theoretical and Applied Science, 3(5), 85-99. https://doi.org/10.17605/OSF.IO/RVNUK
Section
Articles