On the Effect of Physical and Mechanical Properties of Fibrobeton Based on Metallurgical Waste
Keywords:
fiber concrete, polycarboxylate, modifier, mineral microfiller, metallurgical slag, basalt fiber
Abstract
The article presents the results of physico-mechanical performance of waste-based, mechanically activated microfiller and polycarboxylate superplasticizer and fibrous concrete of basalt fibers generated in the metallurgical industry.
Downloads
Download data is not yet available.
References
1. Adilkhodjaev, A., Kadyrov, I., Rasulmukhamedov, A. Research of porosity of a cement stone with a zeolite containing filler and a superplasticstificator E3S Web of Conferences, 2021, 264, 02007
2. Adilhodzhaev A. I., Kadyrov I. A., Umarov K. S. Research of porosity of a cement stone with a zeolite containing filler and a superplasticstificator //Journal of Tashkent Institute of Railway Engineers. – 2020. – Т. 16. – №. 3. – С. 15-22.
3. Adilhodzhaev A. I. et al. To the Question of the Influence of the Intensity of Active Centers on the Surface of Mineral Fillers on the Properties of Fine-Grained Concrete //International Journal of Innovative Technology and Exploring Engineering (IJITEE). – 2019. – Т. 8. – №. 982. – С. 219-222.
4. Adilkhodzhaev A. I., Umarov K. S., Kadyrov I. A. Some features of the rheological properties of cement pastes with zeolite-containing fillers //International Engineering Research and Development Journal, 5 (CONGRESS). – 2020. – С. 4-4.
5. Adilkhodzhaev A. I. et al. FEATURES OF CONTINUOUS UNITS FORMING OF REINFORCED CONCRETE PRODUCTS //" ONLINE-CONFERENCES" PLATFORM. – 2021. – С. 1-4.
6. Adilkhodzhaev A. I., Kadirov I. A., Abdullaev U. K. SOME ISSUES OF MOISTURE TRANSFER IN CONCRETE. – 2021.
7. Adilkhodjayev A. I., Kadyrov I. A., Umarov K. S. ABOUT THE INFLUENCE OF A ZEOLITE CONTAINING FILLER (NATROLITE) ON THE PROPERTIES OF CEMENT BINDER //Journal of Tashkent Institute of Railway Engineers. – 2020. – Т. 16. – №. 2. – С. 20-27.
8. Ishanovich A. A., Abdullaevich K. I. TECHNICAL AND ECONOMIC COMPARISON OF THE EFFICIENCY OF PRODUCTION OF EMPTY PLATES OF OVERLAPPING OF UNDERWORKING FORMING WHEN REINFORCED WITH WIRE AND ROPES. – 2021.
9. Adilkhojaev A. I., Kadirov I. A. ON THE MECHANOACTIVATION OF METALLURGICAL WASTE. – 2021.
10. Adilkhodzhaev A. I. et al. FEATURES OF CONTINUOUS UNITS FORMING OF REINFORCED CONCRETE PRODUCTS //" ONLINE-CONFERENCES" PLATFORM. – 2021. – С. 1-4.
11. Adilkhodjayev A. I., Kadyrov I. A., Umarov K. S. STRUCTURE FORMATION OF A CEMENT STONE WITH A ZEOLITE CONTAINING FILLER (NATROLITE) AND A SUPERPLASTIFICATOR //Journal of Tashkent Institute of Railway Engineers. – 2020. – Т. 16. – №. 4. – С. 73-77.
12. Adilkhodzhaev A. I. et al. To The Question of the Choice of Technological Equipment For Continuous Shell less Forming Reinforced Concrete Products on a Long Stand //European Multidisciplinary Journal of Modern Science. – 2022. – Т. 4. – С. 1-9.
13. Adilkhodzhaev A. I. et al. Modern Resource-Saving Technologies for Production of Pre-Concrete Concrete Structures //" ONLINE-CONFERENCES" PLATFORM. – 2021. – С. 86-89.
14. Akramov X.A. Beton texnologiyasi 1-qism / Nuritdinov H. N. // Toshkent: TAQI, 2012-yil. 102 bet.
15. Bogdanova Y.R. Sintetik polipropilen tolalar bilan dispers armaturalangan betonning eksperemental tadqiqoti / Bogdanov Y.R. // TGASU habarnomasi. SantPeterburg, 2015. №3. C.8.
2. Adilhodzhaev A. I., Kadyrov I. A., Umarov K. S. Research of porosity of a cement stone with a zeolite containing filler and a superplasticstificator //Journal of Tashkent Institute of Railway Engineers. – 2020. – Т. 16. – №. 3. – С. 15-22.
3. Adilhodzhaev A. I. et al. To the Question of the Influence of the Intensity of Active Centers on the Surface of Mineral Fillers on the Properties of Fine-Grained Concrete //International Journal of Innovative Technology and Exploring Engineering (IJITEE). – 2019. – Т. 8. – №. 982. – С. 219-222.
4. Adilkhodzhaev A. I., Umarov K. S., Kadyrov I. A. Some features of the rheological properties of cement pastes with zeolite-containing fillers //International Engineering Research and Development Journal, 5 (CONGRESS). – 2020. – С. 4-4.
5. Adilkhodzhaev A. I. et al. FEATURES OF CONTINUOUS UNITS FORMING OF REINFORCED CONCRETE PRODUCTS //" ONLINE-CONFERENCES" PLATFORM. – 2021. – С. 1-4.
6. Adilkhodzhaev A. I., Kadirov I. A., Abdullaev U. K. SOME ISSUES OF MOISTURE TRANSFER IN CONCRETE. – 2021.
7. Adilkhodjayev A. I., Kadyrov I. A., Umarov K. S. ABOUT THE INFLUENCE OF A ZEOLITE CONTAINING FILLER (NATROLITE) ON THE PROPERTIES OF CEMENT BINDER //Journal of Tashkent Institute of Railway Engineers. – 2020. – Т. 16. – №. 2. – С. 20-27.
8. Ishanovich A. A., Abdullaevich K. I. TECHNICAL AND ECONOMIC COMPARISON OF THE EFFICIENCY OF PRODUCTION OF EMPTY PLATES OF OVERLAPPING OF UNDERWORKING FORMING WHEN REINFORCED WITH WIRE AND ROPES. – 2021.
9. Adilkhojaev A. I., Kadirov I. A. ON THE MECHANOACTIVATION OF METALLURGICAL WASTE. – 2021.
10. Adilkhodzhaev A. I. et al. FEATURES OF CONTINUOUS UNITS FORMING OF REINFORCED CONCRETE PRODUCTS //" ONLINE-CONFERENCES" PLATFORM. – 2021. – С. 1-4.
11. Adilkhodjayev A. I., Kadyrov I. A., Umarov K. S. STRUCTURE FORMATION OF A CEMENT STONE WITH A ZEOLITE CONTAINING FILLER (NATROLITE) AND A SUPERPLASTIFICATOR //Journal of Tashkent Institute of Railway Engineers. – 2020. – Т. 16. – №. 4. – С. 73-77.
12. Adilkhodzhaev A. I. et al. To The Question of the Choice of Technological Equipment For Continuous Shell less Forming Reinforced Concrete Products on a Long Stand //European Multidisciplinary Journal of Modern Science. – 2022. – Т. 4. – С. 1-9.
13. Adilkhodzhaev A. I. et al. Modern Resource-Saving Technologies for Production of Pre-Concrete Concrete Structures //" ONLINE-CONFERENCES" PLATFORM. – 2021. – С. 86-89.
14. Akramov X.A. Beton texnologiyasi 1-qism / Nuritdinov H. N. // Toshkent: TAQI, 2012-yil. 102 bet.
15. Bogdanova Y.R. Sintetik polipropilen tolalar bilan dispers armaturalangan betonning eksperemental tadqiqoti / Bogdanov Y.R. // TGASU habarnomasi. SantPeterburg, 2015. №3. C.8.
Published
2022-06-04
How to Cite
N. I., I., P. Z, C., N. S., G., S. B, N., & N. Y, D. (2022). On the Effect of Physical and Mechanical Properties of Fibrobeton Based on Metallurgical Waste. Central Asian Journal of Theoretical and Applied Science, 3(6), 11-15. Retrieved from https://cajotas.centralasianstudies.org/index.php/CAJOTAS/article/view/592
Section
Articles
